[PATCH v5 09/16] thermal: sun8i: Add A100's THS controller support

[Frank Lee]

From: Yangtao Li <frank at allwinnertech.com>

This patch add thermal sensor controller support for A100,
which is similar to the previous ones.

Signed-off-by: Yangtao Li <frank at allwinnertech.com>
---
 drivers/thermal/sun8i_thermal.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index f423d44b9290..f8b13071a6f4 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -590,6 +590,19 @@ static const struct ths_thermal_chip sun50i_a64_ths = {
 	.calc_temp = sun8i_ths_calc_temp,
 };
 
+static const struct ths_thermal_chip sun50i_a100_ths = {
+	.sensor_num = 3,
+	.has_bus_clk_reset = true,
+	.ft_deviation = 8000,
+	.offset = 187744,
+	.scale = 672,
+	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+	.calibrate = sun50i_h6_ths_calibrate,
+	.init = sun50i_h6_thermal_init,
+	.irq_ack = sun50i_h6_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
 static const struct ths_thermal_chip sun50i_h5_ths = {
 	.sensor_num = 2,
 	.has_mod_clk = true,
@@ -619,6 +632,7 @@ static const struct of_device_id of_ths_match[] = {
 	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
 	{ .compatible = "allwinner,sun8i-r40-ths", .data = &sun8i_r40_ths },
 	{ .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths },
+	{ .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
 	{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
 	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
 	{ /* sentinel */ },
-- 
2.24.0