[PATCH V2 0/3] gpio-xilinx: Update on xilinx gpio driver

[Srinivas Neeli]

This patch series does the following:
-Add clock adaption support
-Add interupt support
-Add MAINTAINERS fragment

Changes in V2:
-Added check for return value of platform_get_irq() API.
-Updated code to support rising edge and falling edge.
-Added xgpio_xlate() API to support switch.
-Added MAINTAINERS fragment.
---
Tested Below scenarios:
-Tested Loop Back.(channel 1.0 connected to channel 2.0)
-Tested External switch(Used DIP switch)
-Tested Cascade scenario(Here gpio controller acting as
 an interrupt controller).
---


Srinivas Neeli (3):
  gpio: xilinx: Add clock adaptation support
  gpio: xilinx: Add interrupt support
  MAINTAINERS: add fragment for xilinx GPIO drivers

 MAINTAINERS                |  10 ++
 drivers/gpio/Kconfig       |   1 +
 drivers/gpio/gpio-xilinx.c | 404 ++++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 395 insertions(+), 20 deletions(-)

-- 
2.7.4