[PATCH 3/3] ARM: dts: colibri-imx7: add usb dual-role switch capability

[Philippe Schenker]

On Mon, 2020-07-20 at 09:37 +0200, Philippe Schenker wrote:
> On Mon, 2020-07-20 at 10:11 +0800, Shawn Guo wrote:
> > On Tue, Jul 14, 2020 at 08:20:34AM +0000, Philippe Schenker wrote:
> > > On Tue, 2020-07-14 at 09:55 +0200, Ahmad Fatoum wrote:
> > > > Hello Philippe,
> > > > 
> > > > On 7/13/20 1:53 PM, Philippe Schenker wrote:
> > > > > On Mon, 2020-07-13 at 11:46 +0200, Ahmad Fatoum wrote:
> > > > > > Hello Philippe,
> > > > > > 
> > > > > > > +	extcon_usbc_det: usbc_det {
> > > > > > > +		compatible = "linux,extcon-usb-gpio";
> > > > > > 
> > > > > > According to 4602f3bff266 ("usb: common: add USB GPIO based
> > > > > > connection
> > > > > > detection driver"):
> > > > > > "the old way using extcon to support USB Dual-Role switch is
> > > > > > now
> > > > > > deprecated
> > > > > >  when use Type-B connector."
> > > > > > 
> > > > > > Have you considered using a compatible = "gpio-usb-b-
> > > > > > connector"
> > > > > > child
> > > > > > node instead?
> > > > > > 
> > > > > > Cheers,
> > > > > > Ahmad
> > > > > 
> > > > > Thanks for the Hint Ahmad,
> > > > > 
> > > > > I already tried and just now tried again but it doesn't work
> > > > > on
> > > > > our
> > > > > hardware. Are you sure this works with chipidea driver?
> > > > 
> > > > I haven't, just wanted to point its existence out in case you
> > > > didn't
> > > > know.
> > > > Seems we need to call of_platform_populate somewhere in the
> > > > driver.
> > > > Unsure what other changes are necessary.
> > > 
> > > Yep, thanks for that! It seems like that need to be really called
> > > as
> > > I
> > > can't get a probe of the new usb connector driver. I quickly
> > > grepped
> > > through code and saw that tegra USB driver is calling
> > > of_platform_populate and they also use that gpio-usb-b-connector.
> > > 
> > > > > Should this new usb-connector stuff work in general with every
> > > > > old
> > > > > driver?
> > > > 
> > > > If the driver support isn't there yet, I think use of extcon is
> > > > fine
> > > > as is.
> > 
> > Shouldn't we improve chipidea driver to get it work with gpio-usb-b-
> > connector?
> 
> I know this would be nice but I don't know that code well enough to be
> able to make this changes in a timely manner. And I rather like to
> have
> support for USB dual-role support "the old way" now than never (we
> actually tried this for along time on our Colibri boards).
> 
> I discovered a bug in that driver together with Peter Chen, which got
> now solved by him and I would like to use the host/device switching on
> colibri-imx6/7 boards now.

Hi Shawn,

Could you let me know how I should proceed with these patches?

Thanks,
Philippe