[PATCH 2/4] i2c: mediatek: Support DMA mask range over 33-bits
Qii Wang
qii.wang at mediatek.com
Wed Jul 22 08:31:44 EDT 2020
Replace 'support_33bits with 'dma_max_support' for DMA mask
operation, and replace 'mtk_i2c_set_4g_mode' with 'upper_32_bits'.
Signed-off-by: Qii Wang <qii.wang at mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 37 +++++++++++++++++--------------------
1 file changed, 17 insertions(+), 20 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index e6b984a..e475877 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -209,6 +209,7 @@ struct mtk_i2c_compatible {
unsigned char dma_sync: 1;
unsigned char ltiming_adjust: 1;
unsigned char apdma_sync: 1;
+ unsigned char max_dma_support;
};
struct mtk_i2c_ac_timing {
@@ -311,11 +312,11 @@ struct i2c_spec_values {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 1,
.dma_sync = 0,
.ltiming_adjust = 0,
.apdma_sync = 0,
+ .max_dma_support = 33,
};
static const struct mtk_i2c_compatible mt6577_compat = {
@@ -325,11 +326,11 @@ struct i2c_spec_values {
.dcm = 1,
.auto_restart = 0,
.aux_len_reg = 0,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
.apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -339,11 +340,11 @@ struct i2c_spec_values {
.dcm = 0,
.auto_restart = 0,
.aux_len_reg = 0,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
.apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt7622_compat = {
@@ -353,11 +354,11 @@ struct i2c_spec_values {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
.apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -366,11 +367,11 @@ struct i2c_spec_values {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
.apdma_sync = 0,
+ .max_dma_support = 33,
};
static const struct mtk_i2c_compatible mt8183_compat = {
@@ -380,11 +381,11 @@ struct i2c_spec_values {
.dcm = 0,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 1,
.dma_sync = 1,
.ltiming_adjust = 1,
.apdma_sync = 0,
+ .max_dma_support = 33,
};
static const struct of_device_id mtk_i2c_of_match[] = {
@@ -796,11 +797,6 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
return 0;
}
-static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
-{
- return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
-}
-
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
@@ -885,8 +881,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(rpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
}
@@ -908,8 +904,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(wpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
}
@@ -954,11 +950,11 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(wpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
- reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+ reg_4g_mode = upper_32_bits(rpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
}
@@ -1232,8 +1228,9 @@ static int mtk_i2c_probe(struct platform_device *pdev)
return -EINVAL;
}
- if (i2c->dev_comp->support_33bits) {
- ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
+ if (i2c->dev_comp->max_dma_support > 32) {
+ ret = dma_set_mask(&pdev->dev,
+ DMA_BIT_MASK(i2c->dev_comp->max_dma_support));
if (ret) {
dev_err(&pdev->dev, "dma_set_mask return error.\n");
return ret;
--
1.9.1
More information about the linux-arm-kernel
mailing list