[PATCH v2 05/18] clk: at91: sam9x60-pll: check fcore against ranges

[Claudiu Beznea]

According to datasheet the range of 600-1200MHz is for the
frequency generated by the fractional part of the PLL (namely
Fcorepllck according to datasheet). With this in mind the output
range of the PLL itself (fractional + div), taking into account
that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz.

Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 drivers/clk/at91/clk-sam9x60-pll.c | 12 +++++++++++-
 drivers/clk/at91/sam9x60.c         |  2 +-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index 4b7b6c435d4e..a933abebfbaf 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -21,6 +21,9 @@
 #define UPLL_DIV		2
 #define PLL_MUL_MAX		(FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1)
 
+#define FCORE_MIN		(600000000)
+#define FCORE_MAX		(1200000000)
+
 #define PLL_MAX_ID		1
 
 struct sam9x60_pll {
@@ -168,6 +171,7 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll,
 	unsigned long bestdiv = 0;
 	unsigned long bestmul = 0;
 	unsigned long bestfrac = 0;
+	u64 fcore = 0;
 
 	if (rate < characteristics->output[0].min ||
 	    rate > characteristics->output[0].max)
@@ -212,6 +216,11 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll,
 				remainder = rate - tmprate;
 		}
 
+		fcore = parent_rate * (tmpmul + 1) +
+			((u64)parent_rate * tmpfrac >> 22);
+		if (fcore < FCORE_MIN || fcore > FCORE_MAX)
+			continue;
+
 		/*
 		 * Compare the remainder with the best remainder found until
 		 * now and elect a new best multiplier/divider pair if the
@@ -231,7 +240,8 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll,
 	}
 
 	/* Check if bestrate is a valid output rate  */
-	if (bestrate < characteristics->output[0].min ||
+	if (fcore < FCORE_MIN || fcore > FCORE_MAX ||
+	    bestrate < characteristics->output[0].min ||
 	    bestrate > characteristics->output[0].max)
 		return -ERANGE;
 
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index 3e20aa68259f..633891b98d43 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -22,7 +22,7 @@ static const struct clk_master_layout sam9x60_master_layout = {
 };
 
 static const struct clk_range plla_outputs[] = {
-	{ .min = 300000000, .max = 600000000 },
+	{ .min = 2343750, .max = 1200000000 },
 };
 
 static const struct clk_pll_characteristics plla_characteristics = {
-- 
2.7.4