[PATCH v2 04/18] clk: at91: sam9x60-pll: use logical or for range check

[Claudiu Beznea]

Use logical or for range check. In case bestrate is not in
characteristics->output[0].min..characteristics->output[0].max
range we should return -ERANGE.

Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni at bootlin.com>
---
 drivers/clk/at91/clk-sam9x60-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index 3522eae2edd6..4b7b6c435d4e 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -231,7 +231,7 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll,
 	}
 
 	/* Check if bestrate is a valid output rate  */
-	if (bestrate < characteristics->output[0].min &&
+	if (bestrate < characteristics->output[0].min ||
 	    bestrate > characteristics->output[0].max)
 		return -ERANGE;
 
-- 
2.7.4