[PATCH net-next v2 6/7] ARM: dts: at91: sama5d4: add an mdio sub-node to macb

[Codrin Ciubotariu]

Use the new macb bindings and add an mdio sub-node to contain all the
phy nodes.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at microchip.com>
---

Changes in v2:
 - none

 arch/arm/boot/dts/at91-sama5d4_xplained.dts | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 924d9491780d..62598d06aead 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -59,10 +59,14 @@ macb0: ethernet at f8020000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
-				phy0: ethernet-phy at 1 {
-					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-					reg = <1>;
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					phy0: ethernet-phy at 1 {
+						interrupt-parent = <&pioE>;
+						interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+						reg = <1>;
+					};
 				};
 			};
 
-- 
2.25.1