[PATCH v2 1/3] dt: update Marvell Armada 38x COMPHY binding

[Russell King]

Update the Marvell Armada 38x COMPHY binding with an additional
optional register pair describing the location of an undocumented
system register controlling something to do with the Gigabit Ethernet
and COMPHY.  There is one bit for each COMPHY lane that may be using
the serdes, but exactly what this register does is completely unknown.

This register only appears to exist on Armada 38x devices, and not
other SoCs using the NETA ethernet block, so it seems logical that it
should be part of the COMPHY.

This is also how u-boot groups this register; it is dealt with as part
of the COMPHY initialisation there.

However, at the end of the day, due to the undocumented nature of this
register, we can only guess.

Acked-by: Rob Herring <robh at kernel.org>
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
 .../devicetree/bindings/phy/phy-armada38x-comphy.txt   | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
index ad49e5c01334..8b5a7a28a35b 100644
--- a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
@@ -12,6 +12,13 @@ PCIe...).
 - #address-cells: should be 1.
 - #size-cells: should be 0.
 
+Optional properties:
+
+- reg-names: must be "comphy" as the first name, and "conf".
+- reg: must contain the comphy register location and length as the first
+    pair, followed by an optional configuration register address and
+    length pair.
+
 A sub-node is required for each comphy lane provided by the comphy.
 
 Required properties (child nodes):
@@ -24,7 +31,8 @@ A sub-node is required for each comphy lane provided by the comphy.
 
 	comphy: phy at 18300 {
 		compatible = "marvell,armada-380-comphy";
-		reg = <0x18300 0x100>;
+		reg-names = "comphy", "conf";
+		reg = <0x18300 0x100>, <0x18460 4>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-- 
2.20.1