[PATCH] ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx

[Alexandre Torgue]

Hi Alain

On 6/23/20 11:31 AM, Alain Volmat wrote:
> From: Fabrice Gasnier <fabrice.gasnier at st.com>
> 
> Configure I2C5 on stm32mp15 DK boards. It's available and can be used on:
> - Arduino connector
> - GPIO expansion connector
> Keep it disabled by default, so the pins are kept in their initial state to
> lower power consumption. This way they can also be used as GPIO.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
> Signed-off-by: Alain Volmat <alain.volmat at st.com>
> ---
>   arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> index fcf50131e5fe..e69aba9830b3 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> @@ -361,6 +361,19 @@
>   	};
>   };
>   
> +&i2c5 {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&i2c5_pins_a>;
> +	pinctrl-1 = <&i2c5_sleep_pins_a>;
> +	i2c-scl-rising-time-ns = <185>;
> +	i2c-scl-falling-time-ns = <20>;
> +	clock-frequency = <400000>;
> +	/* spare dmas for other usage */
> +	/delete-property/dmas;
> +	/delete-property/dma-names;
> +	status = "disabled";
> +};
> +
>   &i2s2 {
>   	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
>   	clock-names = "pclk", "i2sclk", "x8k", "x11k";
> 

Applied on stm32-next.

Thanks.
Alex