[PATCH v4 0/4] Split PCIe node to comply with hardware design

[chuanjia.liu]

There are two independent PCIe controllers in MT2712 and MT7622
platform, and each of them should contain an independent MSI
domain.

In current architecture, MSI domain will be inherited from the
root bridge, and all of the devices will share the same MSI domain.
Hence that, the PCIe devices will not work properly if the irq
number which required is more than 32.

Split the PCIe node for MT2712 and MT7622 platform to fix MSI
issue and comply with the hardware design.

change note:
  v4:change commit message due to bayes statistical bogofilter
     considers this series patch SPAM.
  v3:rebase for 5.8-rc1. Only collect ack of Ryder, No code change.
  v2:change the allocation of MT2712 PCIe MMIO space due to the
     allocation size is not right in v1.

chuanjia.liu (4):
  dt-bindings: pci: mediatek: Modified the Device tree bindings
  PCI: mediatek: Use regmap to get shared pcie-cfg base
  arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622
  ARM: dts: mediatek: Modified MT7629 PCIe node

 .../bindings/pci/mediatek-pcie-cfg.yaml       |  38 +++++
 .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++-------
 arch/arm/boot/dts/mt7629-rfb.dts              |   3 +-
 arch/arm/boot/dts/mt7629.dtsi                 |  23 +--
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi     |  75 +++++----
 .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  |  16 +-
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts  |   6 +-
 arch/arm64/boot/dts/mediatek/mt7622.dtsi      |  68 ++++++---
 drivers/pci/controller/pcie-mediatek.c        |  25 ++-
 9 files changed, 258 insertions(+), 140 deletions(-)
 create mode 100644 .../bindings/pci/mediatek-pcie-cfg.yaml

-- 
2.18.0