[PATCH v3 2/4] arm64: dts: hisilicon: hikey: fixes to comply with adi,adv7533 DT binding

[Wei Xu]

Hi Ricardo,

On 2020/6/1 14:33, Ricardo Cañuelo wrote:
> hi3660-hikey960.dts:
>   Define a 'ports' node for 'adv7533: adv7533 at 39' and the
>   'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT
>   binding.
> 
>   This fills the requirements to meet the binding requirements,
>   remote endpoints are not defined.
> 
> hi6220-hikey.dts:
>   Change property name s/pd-gpio/pd-gpios, gpio properties should be
>   plural. This is just a cosmetic change.
> 
> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo at collabora.com>
> Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

Thanks!
Applied this patch only to the hisilicon arm64 dt tree since
it does not depend on the new yaml format binding.

Best Regards,
Wei

> ---
>  arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 11 +++++++++++
>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts    |  2 +-
>  2 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> index e035cf195b19..8c4bfbaf3a80 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> @@ -530,6 +530,17 @@
>  		status = "ok";
>  		compatible = "adi,adv7533";
>  		reg = <0x39>;
> +		adi,dsi-lanes = <4>;
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			port at 0 {
> +				reg = <0>;
> +			};
> +			port at 1 {
> +				reg = <1>;
> +			};
> +		};
>  	};
>  };
>  
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index c14205cd6bf5..3e47150c05ec 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -516,7 +516,7 @@
>  		reg = <0x39>;
>  		interrupt-parent = <&gpio1>;
>  		interrupts = <1 2>;
> -		pd-gpio = <&gpio0 4 0>;
> +		pd-gpios = <&gpio0 4 0>;
>  		adi,dsi-lanes = <4>;
>  		#sound-dai-cells = <0>;
>  
>