[PATCH v8 0/2] phy: bcm63xx-usbh: Add BCM63xx USBH driver

[Álvaro Fernández Rojas]

Add BCM63xx USBH PHY driver for BMIPS.

v8: readd Simon as author and remove his email address from the source code.
v7: remove Simon from authors and introduce changes suggested by Rob:
  - Move clock conditions to the main section.
  - Set missing additionalProperties to false.
v6: introduce changes suggested by Rob and Vinod:
 - Remove BMIPS_GENERIC default from kconfig.
 - Print registered message as debug.
 - Add another if case to device tree binding for SoCs with just 1 clock.
 - Ignored "additionalProperties: false" suggestion since it triggers a
  warning. This has been reported, but I haven't received any answer yet.
v5: use devm_reset_control_get_exclusive.
v4: fix dt-bindings documentation and improve device mode config.
v3: introduce changes suggested by Florian:
 - Add support for device mode.
v2: introduce changes suggested by Florian:
 - phy-cells changed to 1.
 - Drop OF dependency (use device_get_match_data).
 - Drop __initconst from variant tables.
 - Use devm_clk_get_optional.

Álvaro Fernández Rojas (2):
  dt-bindings: phy: add bcm63xx-usbh bindings
  phy: bcm63xx-usbh: Add BCM63xx USBH driver

 .../bindings/phy/brcm,bcm63xx-usbh-phy.yaml   |  79 +++
 drivers/phy/broadcom/Kconfig                  |   8 +
 drivers/phy/broadcom/Makefile                 |   1 +
 drivers/phy/broadcom/phy-bcm63xx-usbh.c       | 457 ++++++++++++++++++
 4 files changed, 545 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
 create mode 100644 drivers/phy/broadcom/phy-bcm63xx-usbh.c

-- 
2.27.0