[PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add an mdio node

[Shawn Guo]

On Mon, Jul 13, 2020 at 10:04:15AM -0300, Fabio Estevam wrote:
> imx6qdl-sabresd has an Atheros AR8031 Ethernet PHY at address 1.
> 
> The AR8031 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin.
> 
> Improve the Ethernet representation by adding an mdio node with such
> information.
> 
> An advantage of adding the mdio node is that the AR8031 initialization
> code in the mx6sabresd board file in U-Boot can totally be removed.
> 
> Signed-off-by: Fabio Estevam <festevam at gmail.com>

Applied both, thanks.