[PATCH 28/30] iio: imu: st_lsm6dsx: st_lsm6dsx_shub: Demote obvious misuse of kerneldoc to standard comment blocks

[Jonathan Cameron]

On Fri, 17 Jul 2020 17:55:36 +0100
Lee Jones <lee.jones at linaro.org> wrote:

> No attempt has been made to document any of the demoted functions here.
> 
> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_read_output'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read_output'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read_output'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_write_reg'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write_reg'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write_reg'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write_reg'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_read'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_read'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_write'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write'
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write'
> 
> Cc: Lorenzo Bianconi <lorenzo.bianconi83 at gmail.com>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
Applied.

Thanks,

Jonathan

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> index c1f83fe0d8dad..9a14dde4795da 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> @@ -163,7 +163,7 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
>  	msleep((2000000U / odr) + 1);
>  }
>  
> -/**
> +/*
>   * st_lsm6dsx_shub_read_output - read i2c controller register
>   *
>   * Read st_lsm6dsx i2c controller register
> @@ -195,7 +195,7 @@ st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data,
>  	return err;
>  }
>  
> -/**
> +/*
>   * st_lsm6dsx_shub_write_reg - write i2c controller register
>   *
>   * Write st_lsm6dsx i2c controller register
> @@ -273,7 +273,7 @@ static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
>  	return err;
>  }
>  
> -/**
> +/*
>   * st_lsm6dsx_shub_read - read data from slave device register
>   *
>   * Read data from slave device register. SLV0 is used for
> @@ -323,7 +323,7 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
>  					 sizeof(config));
>  }
>  
> -/**
> +/*
>   * st_lsm6dsx_shub_write - write data to slave device register
>   *
>   * Write data from slave device register. SLV0 is used for