[PATCH 16/30] iio: accel: sca3000: Fix 2 misspellings and demote nonconforming kerneldocs

[Jonathan Cameron]

On Fri, 17 Jul 2020 17:55:24 +0100
Lee Jones <lee.jones at linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/iio/accel/sca3000.c:210: warning: Function parameter or member 'mot_det_mult_xz' not described in 'sca3000_chip_info'
>  drivers/iio/accel/sca3000.c:210: warning: Function parameter or member 'mot_det_mult_y' not described in 'sca3000_chip_info'
>  drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'indio_dev' not described in 'sca3000_read_event_value'
>  drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'chan' not described in 'sca3000_read_event_value'
>  drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'type' not described in 'sca3000_read_event_value'
>  drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'dir' not described in 'sca3000_read_event_value'
>  drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'info' not described in 'sca3000_read_event_value'
>  drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'val' not described in 'sca3000_read_event_value'
>  drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'val2' not described in 'sca3000_read_event_value'
>  drivers/iio/accel/sca3000.c:1110: warning: Function parameter or member 'indio_dev' not described in 'sca3000_read_event_config'
>  drivers/iio/accel/sca3000.c:1110: warning: Function parameter or member 'chan' not described in 'sca3000_read_event_config'
>  drivers/iio/accel/sca3000.c:1110: warning: Function parameter or member 'type' not described in 'sca3000_read_event_config'
>  drivers/iio/accel/sca3000.c:1110: warning: Function parameter or member 'dir' not described in 'sca3000_read_event_config'
> 
> Cc: Christophe JAILLET <christophe.jaillet at wanadoo.fr>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
Applied.

Thanks,

Jonathan

> ---
>  drivers/iio/accel/sca3000.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
> index 6e429072e44a4..3952187166ffa 100644
> --- a/drivers/iio/accel/sca3000.c
> +++ b/drivers/iio/accel/sca3000.c
> @@ -186,9 +186,9 @@ struct sca3000_state {
>   * @option_mode_2_freq:		option mode 2 sampling frequency
>   * @option_mode_2_3db_freq:	3db cutoff frequency of the low pass filter for
>   * the second option mode.
> - * @mod_det_mult_xz:		Bit wise multipliers to calculate the threshold
> + * @mot_det_mult_xz:		Bit wise multipliers to calculate the threshold
>   * for motion detection in the x and z axis.
> - * @mod_det_mult_y:		Bit wise multipliers to calculate the threshold
> + * @mot_det_mult_y:		Bit wise multipliers to calculate the threshold
>   * for motion detection in the y axis.
>   *
>   * This structure is used to hold information about the functionality of a given
> @@ -859,9 +859,9 @@ static ssize_t sca3000_read_av_freq(struct device *dev,
>   */
>  static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq);
>  
> -/**
> +/*
>   * sca3000_read_event_value() - query of a threshold or period
> - **/
> + */
>  static int sca3000_read_event_value(struct iio_dev *indio_dev,
>  				    const struct iio_chan_spec *chan,
>  				    enum iio_event_type type,
> @@ -1100,9 +1100,9 @@ static irqreturn_t sca3000_event_handler(int irq, void *private)
>  	return IRQ_HANDLED;
>  }
>  
> -/**
> +/*
>   * sca3000_read_event_config() what events are enabled
> - **/
> + */
>  static int sca3000_read_event_config(struct iio_dev *indio_dev,
>  				     const struct iio_chan_spec *chan,
>  				     enum iio_event_type type,