[PATCH] dt-bindings: uniphier-thermal: add minItems to socionext, tmod-calibration

[Rob Herring]

On Thu, Jul 16, 2020 at 10:54 PM Masahiro Yamada <masahiroy at kernel.org> wrote:
>
> On Fri, Jul 17, 2020 at 8:09 AM Rob Herring <robh at kernel.org> wrote:
> >
> > On Tue, Jul 07, 2020 at 07:23:38PM +0900, Masahiro Yamada wrote:
> > > As the description says, this property contains a pair of calibration
> > > values. The number of items must be exactly 2.
> > >
> > > Add minItems to check a too short property.
> > >
> > > While I was here, I also added this property to the example because
> > > this is the case in the real DT file,
> > > arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
> > >
> > > Also, fix the interrupt type (edge -> level) to align with the
> > > real DT.
> > >
> > > Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> > > ---
> > >
> > >  .../bindings/thermal/socionext,uniphier-thermal.yaml          | 4 +++-
> > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
> > > index 553c9dcdaeeb..57ffd0c4c474 100644
> > > --- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
> > > +++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
> > > @@ -29,6 +29,7 @@ properties:
> > >
> > >    socionext,tmod-calibration:
> > >      $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +    minItems: 2
> >
> > The intent was if minItems is not defined, then the default is the same
> > as maxItems. This is not the default for json-schema, so the tooling is
> > supposed to add it.
>
>
> This implication is unclear.
>
> maxItems should literally only define the max, and
> we should stick to json-schema as much as possible, IMHO.

Yes, but we already deviate a bit as the default json-schema behavior
is a bit different than DT defaults. For example, with just:

items:
  - const: a
  - const: b
  - const: c

All of these pass validation:

[]
[ a ]
[ a, b, c, 1, 2, true ]

when we really only want [ a, b, c ] to pass (by default). So we add
minItems, maxItems, and additionalItems if not specified.

> It would be nice if json-schema had something like:
>
> numItems: 2
>
> as a shorthand for
>
> minItems: 2
> maxItems: 2

Yes, I've been thinking the same thing. It wouldn't be unprecedented
as they added 'const' to shorten 'enum: [ one_entry ]'. We can add our
own keywords too, but I try to avoid that so far. The only ones we
have are internal to dtschema (typeSize and phandle).

Rob