[PATCH 01/30] iio: adc: ti_am335x_adc: Remove a couple of unused 'read' variables

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/iio/adc/ti_am335x_adc.c: In function ‘tiadc_buffer_preenable’:
 drivers/iio/adc/ti_am335x_adc.c:297:21: warning: variable ‘read’ set but not used [-Wunused-but-set-variable]
 297 | int i, fifo1count, read;
 | ^~~~
 drivers/iio/adc/ti_am335x_adc.c: In function ‘tiadc_buffer_predisable’:
 drivers/iio/adc/ti_am335x_adc.c:346:21: warning: variable ‘read’ set but not used [-Wunused-but-set-variable]
 346 | int fifo1count, i, read;
 | ^~~~

Cc: Rachna Patil <rachna at ti.com>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/iio/adc/ti_am335x_adc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 9d984f2a8ba74..93b67bb165044 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -294,7 +294,7 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
 static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
-	int i, fifo1count, read;
+	int i, fifo1count;
 
 	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
 				IRQENB_FIFO1OVRRUN |
@@ -303,7 +303,7 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 	/* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	for (i = 0; i < fifo1count; i++)
-		read = tiadc_readl(adc_dev, REG_FIFO1);
+		tiadc_readl(adc_dev, REG_FIFO1);
 
 	return 0;
 }
@@ -343,7 +343,7 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	struct tiadc_dma *dma = &adc_dev->dma;
-	int fifo1count, i, read;
+	int fifo1count, i;
 
 	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
 				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
@@ -358,7 +358,7 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
 	/* Flush FIFO of leftover data in the time it takes to disable adc */
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	for (i = 0; i < fifo1count; i++)
-		read = tiadc_readl(adc_dev, REG_FIFO1);
+		tiadc_readl(adc_dev, REG_FIFO1);
 
 	return 0;
 }
-- 
2.25.1