[PATCH v2 5/8] arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

This enables passive cooling by down-regulating CPU voltage and frequency.
The trip points were copied from the H3.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 30 ++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 09523f6011c5..6735e316a39c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -3,6 +3,8 @@
 
 #include <arm/sunxi-h3-h5.dtsi>
 
+#include <dt-bindings/thermal/thermal.h>
+
 / {
 	cpus {
 		#address-cells = <1>;
@@ -15,6 +17,7 @@ cpu0: cpu at 0 {
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu at 1 {
@@ -24,6 +27,7 @@ cpu1: cpu at 1 {
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu at 2 {
@@ -33,6 +37,7 @@ cpu2: cpu at 2 {
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu at 3 {
@@ -42,6 +47,7 @@ cpu3: cpu at 3 {
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -173,6 +179,30 @@ cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal {
-- 
2.27.0