[PATCH v2 2/2] ARM: dts: imx7: add support for kamstrup flex concentrator

[Bruno Thomsen]

Hi Fabio,

Den tor. 16. jul. 2020 kl. 20.01 skrev Fabio Estevam <festevam at gmail.com>:
> On Thu, Jul 16, 2020 at 2:26 PM Bruno Thomsen <bruno.thomsen at gmail.com> wrote:
>
> > Limitations: Ethernet PHY type auto detection does not
> > work when using reset-{assert-us,deassert-us,gpios}
> > properties so it's using a fixed PHY type ID for now. Auto
> > detection worked when using the deprecated FEC properties
> > phy-reset-{gpios,duration,post-delay}.
>
> I think we need to understand this better. Why does it fail?

Yes, we need to locate the root cause.

> I gave a test on an imx6q-sabresd and the Ethernet PHY (AR8031) could
> be properly detected using reset-{assert-us,deassert-us,gpios}
> properties inside the mdio node.

Okay, thanks.

> Is this a Micrel KSZ8081 specific issue?

Maybe, I'm actually beginning to suspect that the issue might be related
to polling vs interrupt mode. As all partially related examples I have seen
uses interrupt mode and I have only configured poll mode. But the hardware
does have the interrupt signal connected to the imx7.

> Please report this issue to the Ethernet PHY folks.

I'm going to send an Ethernet PHY mail tomorrow with the details I know
at the moment. Just wanted to get an updated version of the device tree
out in case of any other issues not related to the PHY part.

/Bruno