[PATCH v31 12/12] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes

[Dan Murphy]

Add the reg property to each channel node.  This update is
to accommodate the multicolor framework.  In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy at ti.com>
CC: Linus Walleij <linus.walleij at linaro.org>
Acked-by: Pavel Machek <pavel at ucw.cz>
---
 arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 33e3b0b3c53d..ff47cbf6ed3b 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -58,16 +58,21 @@ lp5521 at 33 {
 				reg = <0x33>;
 				label = "lp5521_pri";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan at 0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					linux,default-trigger = "heartbeat";
 				};
-				chan1 {
+				chan at 1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan at 2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
@@ -77,15 +82,20 @@ lp5521 at 34 {
 				reg = <0x34>;
 				label = "lp5521_sec";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan at 0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan1 {
+				chan at 1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan at 2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-- 
2.27.0