[PATCH 3/4] mfd: mt6360: Fix flow which is used to check ic exist
Gene Chen
gene.chen.richtek at gmail.com
Thu Jul 16 05:53:36 EDT 2020
Matthias Brugger <matthias.bgg at gmail.com> 於 2020年7月10日 週五 下午10:25寫道:
>
>
>
> On 07/07/2020 12:30, Gene Chen wrote:
> > From: Gene Chen <gene_chen at richtek.com>
> >
> > Fix flow which is used to check ic exist
> >
> > Signed-off-by: Gene Chen <gene_chen at richtek.com>
> > ---
> > drivers/mfd/mt6360-core.c | 28 +++++++++++++++++++---------
> > include/linux/mfd/mt6360.h | 8 ++++----
> > 2 files changed, 23 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
> > index 2dd5918..4bb2949 100644
> > --- a/drivers/mfd/mt6360-core.c
> > +++ b/drivers/mfd/mt6360-core.c
> > @@ -293,6 +293,23 @@ static const struct mfd_cell mt6360_devs[] = {
> > NULL, 0, 0, "mediatek,mt6360-tcpc"),
> > };
> >
> > +static int mt6360_check_vendor_info(struct mt6360_data *data)
> > +{
> > + u32 info;
> > + int ret;
> > +
> > + ret = regmap_read(data->regmap, MT6360_REG_PMU_DEVINFO, &info);
> > + if (ret < 0)
> > + return ret;
> > +
> > + if ((info & MT6360_CHIPVEN_MASK) != MT6360_CHIPVEN_VAL)
> > + return -ENODEV;
> > +
> > + data->chip_rev = info & MT6360_CHIPREV_MASK;
> > +
> > + return 0;
> > +}
> > +
> > static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
> > MT6360_PMU_SLAVEID,
> > MT6360_PMIC_SLAVEID,
> > @@ -303,7 +320,6 @@ static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
> > static int mt6360_probe(struct i2c_client *client)
> > {
> > struct mt6360_data *data;
> > - unsigned int reg_data;
> > int i, ret;
> >
> > data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> > @@ -319,16 +335,10 @@ static int mt6360_probe(struct i2c_client *client)
> > return PTR_ERR(data->regmap);
> > }
> >
> > - ret = regmap_read(data->regmap, MT6360_PMU_DEV_INFO, ®_data);
> > + ret = mt6360_check_vendor_info(data);
> > if (ret) {
> > - dev_err(&client->dev, "Device not found\n");
> > - return ret;
> > - }
> > -
> > - data->chip_rev = reg_data & CHIP_REV_MASK;
> > - if (data->chip_rev != CHIP_VEN_MT6360) {
>
> Why not only applying the MASK here instead of put this all in a new function?
>
I think merge the ic check flow into function is well-organized.
if not, i can restore the same as before.
> > dev_err(&client->dev, "Device not supported\n");
> > - return -ENODEV;
> > + return ret;
> > }
> >
> > ret = devm_regmap_add_irq_chip(&client->dev, data->regmap, client->irq,
> > diff --git a/include/linux/mfd/mt6360.h b/include/linux/mfd/mt6360.h
> > index 9fc6718..5ec0f5d 100644
> > --- a/include/linux/mfd/mt6360.h
> > +++ b/include/linux/mfd/mt6360.h
> > @@ -30,7 +30,7 @@ struct mt6360_data {
> > };
> >
> > /* PMU register defininition */
> > -#define MT6360_PMU_DEV_INFO (0x00)
> > +#define MT6360_REG_PMU_DEVINFO (0x00)
> > #define MT6360_PMU_CORE_CTRL1 (0x01)
> > #define MT6360_PMU_RST1 (0x02)
> > #define MT6360_PMU_CRCEN (0x03)
> > @@ -233,8 +233,8 @@ struct mt6360_data {
> > #define MT6360_IRQ_REGNUM 16
> > #define MT6360_IRQ_RETRIG BIT(2)
> >
> > -#define CHIP_VEN_MASK (0xF0)
> > -#define CHIP_VEN_MT6360 (0x50)
> > -#define CHIP_REV_MASK (0x0F)
> > +#define MT6360_CHIPVEN_MASK (0xF0)
> > +#define MT6360_CHIPVEN_VAL (0x50)
> > +#define MT6360_CHIPREV_MASK (0x0F)
>
> Same here as in the other patches. Don't just rename defines if there is no good
> reason.
>
Is easy to read a good reason to rename it?
if not, i can restore the same as before.
> Regards,
> Matthias
>
> >
> > #endif /* __MT6360_H__ */
> >
More information about the linux-arm-kernel
mailing list