[PATCH v4 4/4] arm64: dts: marvell: add SMMU support

[Tomasz Nowicki]

From: Marcin Wojtas <mw at semihalf.com>

Add IOMMU node for Marvell AP806 based SoCs together with platform
and PCI device Stream ID mapping.

Signed-off-by: Marcin Wojtas <mw at semihalf.com>
Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
---
 arch/arm64/boot/dts/marvell/armada-7040.dtsi  | 28 +++++++++++++
 arch/arm64/boot/dts/marvell/armada-8040.dtsi  | 40 +++++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 18 +++++++++
 3 files changed, 86 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 47247215770d..7a3198cd7a07 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -14,3 +14,31 @@
 	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
 		     "marvell,armada-ap806";
 };
+
+&smmu {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 7699b19224c2..79e8ce59baa8 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -15,6 +15,18 @@
 		     "marvell,armada-ap806";
 };
 
+&smmu {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
  * in CP master is not connected (by package) to the oscillator. So
  * disable it. However, the RTC clock in CP slave is connected to the
@@ -23,3 +35,31 @@
 &cp0_rtc {
 	status = "disabled";
 };
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
+
+&cp1_sata0 {
+	iommus = <&smmu 0x454>;
+};
+
+&cp1_usb3_0 {
+	iommus = <&smmu 0x450>;
+};
+
+&cp1_usb3_1 {
+	iommus = <&smmu 0x451>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 7f9b9a647717..12e477f1aeb9 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -56,6 +56,24 @@
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf0000000 0x1000000>;
 
+			smmu: iommu at 5000000 {
+				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
+				reg = <0x100000 0x100000>;
+				dma-coherent;
+				#iommu-cells = <1>;
+				#global-interrupts = <1>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gic: interrupt-controller at 210000 {
 				compatible = "arm,gic-400";
 				#interrupt-cells = <3>;
-- 
2.17.1