[PATCH 03/17] dma: ep93xx_dma: Provide some missing struct attribute documentation

[Lee Jones]

A couple of entries were missed, causing kerneldoc to complain.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/ep93xx_dma.c:183: warning: Function parameter or member 'slave_config' not described in 'ep93xx_dma_chan'
 drivers/dma/ep93xx_dma.c:215: warning: Function parameter or member 'hw_synchronize' not described in 'ep93xx_dma_engine'

Cc: Lennert Buytenhek <buytenh at wantstofly.org>
Cc: Ryan Mallon <rmallon at gmail.com>
Cc: Mika Westerberg <mika.westerberg at iki.fi>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/dma/ep93xx_dma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index 9c8b4d35cf03d..87a246012629f 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -147,6 +147,7 @@ struct ep93xx_dma_desc {
  *                is set via .device_config before slave operation is
  *                prepared
  * @runtime_ctrl: M2M runtime values for the control register.
+ * @slave_config: slave configuration
  *
  * As EP93xx DMA controller doesn't support real chained DMA descriptors we
  * will have slightly different scheme here: @active points to a head of
@@ -187,6 +188,7 @@ struct ep93xx_dma_chan {
  * @dma_dev: holds the dmaengine device
  * @m2m: is this an M2M or M2P device
  * @hw_setup: method which sets the channel up for operation
+ * @hw_synchronize: synchronizes DMA channel termination to current context
  * @hw_shutdown: shuts the channel down and flushes whatever is left
  * @hw_submit: pushes active descriptor(s) to the hardware
  * @hw_interrupt: handle the interrupt
-- 
2.25.1