[PATCH v4 14/16] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
Frank Lee
frank at allwinnertech.com
Tue Jul 14 03:20:29 EDT 2020
From: Yangtao Li <frank at allwinnertech.com>
Allwinner A100 is a new SoC with Cortex-A53 cores, this commit adds
the basical DTSI file of it, including the clock, i2c, pins, sid, ths,
nmi, and UART support.
Signed-off-by: Yangtao Li <frank at allwinnertech.com>
---
.../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 364 ++++++++++++++++++
1 file changed, 364 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
new file mode 100644
index 000000000000..3fb2443f2121
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2020 Yangtao Li <frank at allwinnertech.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu at 1 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+
+ cpu at 2 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+
+ cpu at 3 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ dcxo24M: dcxo24M-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "dcxo24M";
+ #clock-cells = <0>;
+ };
+
+ iosc: internal-osc-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ clock-accuracy = <300000000>;
+ clock-output-names = "iosc";
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x3fffffff>;
+
+ ccu: clock at 3001000 {
+ compatible = "allwinner,sun50i-a100-ccu";
+ reg = <0x03001000 0x1000>;
+ clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ gic: interrupt-controller at 3021000 {
+ compatible = "arm,gic-400";
+ reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
+ <0x03024000 0x2000>, <0x03026000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ sid at 3006000 {
+ compatible = "allwinner,sun50i-a100-sid",
+ "allwinner,sun50i-a64-sid";
+ reg = <0x03006000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: calib at 14 {
+ reg = <0x14 8>;
+ };
+ };
+
+ pio: pinctrl at 300b000 {
+ compatible = "allwinner,sun50i-a100-pinctrl";
+ reg = <0x0300b000 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ uart0_pb_pins: uart0-pb-pins {
+ pins = "PB9", "PB10";
+ function = "uart0";
+ };
+ };
+
+ uart0: serial at 5000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial at 5000400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial at 5000800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial at 5000c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial at 5001000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05001000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ i2c0: i2c at 5002000 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c at 5002400 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002400 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c at 5002800 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002800 0x400>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c at 5002c00 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002c00 0x400>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ths: thermal-sensor at 5070400 {
+ compatible = "allwinner,sun50i-a100-ths";
+ reg = <0x05070400 0x100>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+
+ r_ccu: clock at 7010000 {
+ compatible = "allwinner,sun50i-a100-r-ccu";
+ reg = <0x07010000 0x300>;
+ clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
+ <&ccu CLK_PLL_PERIPH0>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ r_intc: interrupt-controller at 7010320 {
+ compatible = "allwinner,sun50i-a100-nmi",
+ "allwinner,sun9i-a80-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x07010320 0xc>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ r_pio: pinctrl at 7022000 {
+ compatible = "allwinner,sun50i-a100-r-pinctrl";
+ reg = <0x07022000 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ r_i2c0_pins: r-i2c0-pins {
+ pins = "PL0", "PL1";
+ function = "s_i2c0";
+ };
+
+ r_i2c1_pins: r-i2c1-pins {
+ pins = "PL8", "PL9";
+ function = "s_i2c1";
+ };
+ };
+
+ r_uart: serial at 7080000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x07080000 0x400>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&r_ccu CLK_R_APB2_UART>;
+ resets = <&r_ccu RST_R_APB2_UART>;
+ status = "disabled";
+ };
+
+ r_i2c0: i2c at 7081400 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x07081400 0x400>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB2_I2C0>;
+ resets = <&r_ccu RST_R_APB2_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ r_i2c1: i2c at 7081800 {
+ compatible = "allwinner,sun50i-a100-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x07081800 0x400>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB2_I2C1>;
+ resets = <&r_ccu RST_R_APB2_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c1_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal-zone {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ gpu-thermal-zone {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+
+ ddr-thermal-zone {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 2>;
+ };
+ };
+};
--
2.24.0
More information about the linux-arm-kernel
mailing list