[PATCH 2/2] phy: armada-38x: fix NETA lockup when repeatedly switching speeds

Mon Jul 13 13:21:40 EDT 2020

On Mon, Jul 13, 2020 at 05:36:54PM +0200, Gregory CLEMENT wrote:
> Hello,
> 
> > On 10-07-20, 16:19, Russell King - ARM Linux admin wrote:
> >> On Wed, Jul 01, 2020 at 12:27:27PM +0530, Vinod Koul wrote:
> >> > On 30-06-20, 17:05, Russell King wrote:
> >> > > The mvneta hardware appears to lock up in various random ways when
> >> > > repeatedly switching speeds between 1G and 2.5G, which involves
> >> > > reprogramming the COMPHY.  It is not entirely clear why this happens,
> >> > > but best guess is that reprogramming the COMPHY glitches mvneta clocks
> >> > > causing the hardware to fail.  It seems that rebooting resolves the
> >> > > failure, but not down/up cycling the interface alone.
> >> > > 
> >> > > Various other approaches have been tried, such as trying to cleanly
> >> > > power down the COMPHY and then take it back through the power up
> >> > > initialisation, but this does not seem to help.
> >> > > 
> >> > > It was finally noticed that u-boot's last step when configuring a
> >> > > COMPHY for "SGMII" mode was to poke at a register described as
> >> > > "GBE_CONFIGURATION_REG", which is undocumented in any external
> >> > > documentation.  All that we have is the fact that u-boot sets a bit
> >> > > corresponding to the "SGMII" lane at the end of COMPHY initialisation.
> >> > > 
> >> > > Experimentation shows that if we clear this bit prior to changing the
> >> > > speed, and then set it afterwards, mvneta does not suffer this problem
> >> > > on the SolidRun Clearfog when switching speeds between 1G and 2.5G.
> >> > > 
> >> > > This problem was found while script-testing phylink.
> >> > > 
> >> > > Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
> >> > > ---
> >> > >  arch/arm/boot/dts/armada-38x.dtsi          |  3 +-
> >> > 
> >> > lgtm, i need ack for dts parts before I can apply this
> >> 
> >> I'm not sure what the situation is for Bootlin, but they don't seem to
> >> be very responsive right now (covid related?)
> >> 
> >> What I know from what I've been party to on netdev is that Bootlin
> >> sent a patch for the MVPP2 driver, and the very next day someone
> >> reported that the patch caused a bug.  Unfortunately, the patch got
> >> picked up anyway, but there was no response from Bootlin.  After a
> >> month or so, -final was released containing this patch, so now it
> >> had become a regression - and still no response from Bootlin.
> >> 
> >> Eventually the bug got fixed - not because Bootlin fixed it, but
> >> because I ended up spending the time researching how that part of
> >> the network driver worked, diagnosing what was going on, and
> >> eventually fixing it in the most obvious way - but it's not clear
> >> that the fix was the right approach.  Bootlin never commented.  See
> >> 3138a07ce219 ("net: mvpp2: fix RX hashing for non-10G ports").
> >> 
> >> So, I think we have to assume that Bootlin are struggling right now,
> >> and as it's been over a week, it's unlikely that they are going to
> >> respond soon.  What do you think we should do?
> >> 
> >> I also note that Rob has not responded to the DT binding change
> >> either, despite me gently prodding, and Rob processing a whole raft
> >> of DT binding stuff yesterday.
> >> 
> >> I can split the DTS change from the rest of the patch, but I don't
> >> think that really helps without at least the binding change being
> >> agreed.
> >
> > I would prefer splitting, you may sent the DTS to arm arch folks if no
> > response from subarch folks
> 
> Yes please could you split the patch to put the dts apart ? And if the
> binding is accepted we will apply it.

I don't see any sign that Rob will ever review the DTS part, so I'm
at the point of just not caring about this anymore. I will carry it
in my tree, but I'm going to do nothing further.

That means that switching speed on mvneta on the Armada 38x is can
cause the network to die, but hey, if people can't be bothered to
review, and wish to impose rules such as "you can't change anything
with DT without my express say so" which have the effect of blocking
fixes, that's really not my problem.

So, shrug, I'm giving up with these patches.  Sorry.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!