[PATCH 3/6] remoteproc: mtk_vpu_rproc: Add support of JTAG
Alexandre Bailon
abailon at baylibre.com
Mon Jul 13 09:29:24 EDT 2020
The DSP could be debugged using JTAG.
The support of JTAG could enabled at build time and it could be enabled
using debugfs.
Signed-off-by: Alexandre Bailon <abailon at baylibre.com>
---
drivers/remoteproc/Kconfig | 9 ++
drivers/remoteproc/mtk_apu_rproc.c | 156 ++++++++++++++++++++++++++++-
2 files changed, 162 insertions(+), 3 deletions(-)
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index e116d4a12ac3..e1158563e2e8 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -52,6 +52,15 @@ config MTK_APU
It's safe to say N here.
+config MTK_APU_JTAG
+ bool "Enable support of JTAG"
+ depends on MTK_APU
+ help
+ Say y to enable support of JTAG.
+ By default, JTAG will remain disabled until it is enabled using
+ debugfs: remoteproc/remoteproc0/jtag. Write 1 to enable it and
+ 0 to disable it.
+
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
diff --git a/drivers/remoteproc/mtk_apu_rproc.c b/drivers/remoteproc/mtk_apu_rproc.c
index fb416a817ef3..f2342b747a35 100644
--- a/drivers/remoteproc/mtk_apu_rproc.c
+++ b/drivers/remoteproc/mtk_apu_rproc.c
@@ -5,6 +5,7 @@
#include <linux/bitops.h>
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -14,6 +15,7 @@
#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/of_reserved_mem.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/remoteproc.h>
@@ -48,6 +50,11 @@
#define CORE_DEFAULT1 (0x00000140)
#define CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU (0x10 << 0)
#define CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU (0x10 << 5)
+#define CORE_DEFAULT2 (0x00000144)
+#define CORE_DEFAULT2_DBG_EN BIT(3)
+#define CORE_DEFAULT2_NIDEN BIT(2)
+#define CORE_DEFAULT2_SPNIDEN BIT(1)
+#define CORE_DEFAULT2_SPIDEN BIT(0)
#define CORE_XTENSA_ALTRESETVEC (0x000001F8)
struct mtk_vpu_rproc {
@@ -59,6 +66,13 @@ struct mtk_vpu_rproc {
struct clk *axi;
struct clk *ipu;
struct clk *jtag;
+
+#ifdef CONFIG_MTK_APU_JTAG
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pinctrl_default;
+ struct pinctrl_state *pinctrl_jtag;
+ bool jtag_enabled;
+#endif
};
static u32 vpu_read32(struct mtk_vpu_rproc *vpu_rproc, u32 off)
@@ -149,6 +163,133 @@ static irqreturn_t handle_event(int irq, void *data)
return IRQ_HANDLED;
}
+#ifdef CONFIG_MTK_APU_JTAG
+
+static int vpu_enable_jtag(struct mtk_vpu_rproc *vpu_rproc)
+{
+ int ret = 0;
+
+ if (vpu_rproc->jtag_enabled)
+ return -EINVAL;
+
+ ret = pinctrl_select_state(vpu_rproc->pinctrl,
+ vpu_rproc->pinctrl_jtag);
+ if (ret < 0) {
+ dev_err(vpu_rproc->dev, "Failed to configure pins for JTAG\n");
+ return ret;
+ }
+
+ vpu_write32(vpu_rproc, CORE_DEFAULT2,
+ CORE_DEFAULT2_SPNIDEN | CORE_DEFAULT2_SPIDEN |
+ CORE_DEFAULT2_NIDEN | CORE_DEFAULT2_DBG_EN);
+
+ vpu_rproc->jtag_enabled = 1;
+
+ return ret;
+}
+
+static int vpu_disable_jtag(struct mtk_vpu_rproc *vpu_rproc)
+{
+ int ret = 0;
+
+ if (!vpu_rproc->jtag_enabled)
+ return -EINVAL;
+
+ vpu_write32(vpu_rproc, CORE_DEFAULT2, 0);
+
+ ret = pinctrl_select_state(vpu_rproc->pinctrl,
+ vpu_rproc->pinctrl_default);
+ if (ret < 0) {
+ dev_err(vpu_rproc->dev,
+ "Failed to configure pins to default\n");
+ return ret;
+ }
+
+ vpu_rproc->jtag_enabled = 0;
+
+ return ret;
+}
+
+static ssize_t rproc_jtag_read(struct file *filp, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct rproc *rproc = filp->private_data;
+ struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
+ char *buf = vpu_rproc->jtag_enabled ? "enabled\n" : "disabled\n";
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+}
+
+static ssize_t rproc_jtag_write(struct file *filp, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct rproc *rproc = filp->private_data;
+ struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
+ char buf[10];
+ int ret;
+
+ if (count < 1 || count > sizeof(buf))
+ return -EINVAL;
+
+ ret = copy_from_user(buf, user_buf, count);
+ if (ret)
+ return -EFAULT;
+
+ /* remove end of line */
+ if (buf[count - 1] == '\n')
+ buf[count - 1] = '\0';
+
+ if (!strncmp(buf, "1", count) || !strncmp(buf, "enabled", count))
+ ret = vpu_enable_jtag(vpu_rproc);
+ else if (!strncmp(buf, "0", count) || !strncmp(buf, "disabled", count))
+ ret = vpu_disable_jtag(vpu_rproc);
+ else
+ return -EINVAL;
+
+ return ret ? ret : count;
+}
+
+static const struct file_operations rproc_jtag_ops = {
+ .read = rproc_jtag_read,
+ .write = rproc_jtag_write,
+ .open = simple_open,
+};
+
+static int vpu_jtag_probe(struct mtk_vpu_rproc *vpu_rproc)
+{
+ int ret;
+
+ if (!vpu_rproc->rproc->dbg_dir)
+ return -ENODEV;
+
+ vpu_rproc->pinctrl = devm_pinctrl_get(vpu_rproc->dev);
+ if (IS_ERR(vpu_rproc->pinctrl)) {
+ dev_warn(vpu_rproc->dev, "Failed to find JTAG pinctrl\n");
+ return PTR_ERR(vpu_rproc->pinctrl);
+ }
+
+ vpu_rproc->pinctrl_default = pinctrl_lookup_state(vpu_rproc->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(vpu_rproc->pinctrl_default))
+ return PTR_ERR(vpu_rproc->pinctrl_default);
+
+ vpu_rproc->pinctrl_jtag = pinctrl_lookup_state(vpu_rproc->pinctrl,
+ "jtag");
+ if (IS_ERR(vpu_rproc->pinctrl_jtag))
+ return PTR_ERR(vpu_rproc->pinctrl_jtag);
+
+ ret = pinctrl_select_state(vpu_rproc->pinctrl,
+ vpu_rproc->pinctrl_default);
+ if (ret < 0)
+ return ret;
+
+ debugfs_create_file("jtag", 0600, vpu_rproc->rproc->dbg_dir,
+ vpu_rproc->rproc, &rproc_jtag_ops);
+
+ return 0;
+}
+#endif /* CONFIG_MTK_APU_JTAG */
+
static int mtk_vpu_rproc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -228,16 +369,16 @@ static int mtk_vpu_rproc_probe(struct platform_device *pdev)
goto clk_disable_ipu;
}
- vpu_rproc->jtag = devm_clk_get_optional(dev, "jtag");
+ vpu_rproc->jtag = devm_clk_get(vpu_rproc->dev, "jtag");
if (IS_ERR(vpu_rproc->jtag)) {
- dev_err(dev, "Failed to enable jtag clock\n");
+ dev_err(vpu_rproc->dev, "Failed to get jtag clock\n");
ret = PTR_ERR(vpu_rproc->jtag);
goto clk_disable_axi;
}
ret = clk_prepare_enable(vpu_rproc->jtag);
if (ret) {
- dev_err(dev, "Failed to enable jtag clock\n");
+ dev_err(vpu_rproc->dev, "Failed to enable jtag clock\n");
goto clk_disable_axi;
}
@@ -253,6 +394,12 @@ static int mtk_vpu_rproc_probe(struct platform_device *pdev)
goto free_mem;
}
+#ifdef CONFIG_MTK_APU_JTAG
+ ret = vpu_jtag_probe(vpu_rproc);
+ if (ret)
+ dev_warn(dev, "Failed to configure jtag\n");
+#endif
+
return 0;
free_mem:
@@ -277,6 +424,9 @@ static int mtk_vpu_rproc_remove(struct platform_device *pdev)
disable_irq(vpu_rproc->irq);
+#ifdef CONFIG_MTK_APU_JTAG
+ vpu_disable_jtag(vpu_rproc);
+#endif
rproc_del(rproc);
of_reserved_mem_device_release(dev);
clk_disable_unprepare(vpu_rproc->jtag);
--
2.26.2
More information about the linux-arm-kernel
mailing list