[PATCH v3 1/2] arm64: dts: Add a device tree for the Librem 5 phone
Shawn Guo
shawnguo at kernel.org
Sat Jul 11 09:37:18 EDT 2020
On Wed, Jun 17, 2020 at 09:38:20AM +0200, Martin Kepplinger wrote:
> From: "Angus Ainslie (Purism)" <angus at akkea.ca>
>
> Add a devicetree description for the Librem 5 phone. The early batches
> that have been sold are supported as well as the mass-produced device
> available later this year, see https://puri.sm/products/librem-5/
>
> This boots to a working console with working WWAN modem, wifi usdhc,
> IMU sensor device, proximity sensor, haptic motor, gpio keys, GNSS and LEDs.
>
> Signed-off-by: Martin Kepplinger <martin.kepplinger at puri.sm>
> Signed-off-by: Angus Ainslie (Purism) <angus at akkea.ca>
> Signed-off-by: Guido Günther <agx at sigxcpu.org>
> For audio related part:
> Reviewed-by: Daniel Baluta <daniel.baluta at nxp.com>
> ---
>
> revision history
> ----------------
> v3:
> thanks a lot Mark for reviewing! changes since v2:
> * nicer audio cards names
> * squash unneeded audio_pwr regulator
> * remove the unneeded susphy_quirk from dwc3_1 after more testing
> * add usdhc2 card detect via gpio
> * add headphone detect for audio card
>
> v2:
> thanks a lot Marco, Daniel and Pavel for reviewing. changes since v1:
> * alphabetical sortings / more consistent node names
> * remove unused regulator and pinctrl descriptions
> * generic labels for leds, backlight, flash and torch
> * audio clk settings moved to sai2 node
> https://lore.kernel.org/linux-arm-kernel/20200604084756.586-1-martin.kepplinger@puri.sm/T/
>
> v1:
> https://lore.kernel.org/linux-arm-kernel/20200514155737.12160-1-martin.kepplinger@puri.sm/
>
>
>
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/imx8mq-librem5.dts | 1137 +++++++++++++++++
> 2 files changed, 1138 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index cd38d04da5a7..342579121f98 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dts
> new file mode 100644
> index 000000000000..06ffa12e60f7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dts
> @@ -0,0 +1,1137 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018-2020 Purism SPC
> + */
> +
> +/dts-v1/;
> +
> +#include "dt-bindings/input/input.h"
> +#include "dt-bindings/pwm/pwm.h"
> +#include "dt-bindings/usb/pd.h"
> +#include "imx8mq.dtsi"
> +
> +/ {
> + model = "Purism Librem 5";
> + compatible = "purism,librem5", "fsl,imx8mq";
Is the compatible documented?
> +
> + backlight_dsi: backlight-dsi {
> + compatible = "led-backlight";
> + leds = <&led_backlight>;
> + brightness-levels = <255>;
> + default-brightness-level = <100>;
I'm not sure these two properties are coded correctly, you may want to
double check the bindings doc.
> + };
> +
> + pmic_osc: clock-pmic {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "pmic_osc";
> + };
> +
> + chosen {
> + stdout-path = &uart1;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_keys>;
> +
> + vol-down {
> + label = "VOL_DOWN";
> + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + };
> +
> + vol-up {
> + label = "VOL_UP";
> + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + };
> + };
> +
> + pwmleds {
> + compatible = "pwm-leds";
> +
> + blue {
> + label = "blue:status";
> + max-brightness = <248>;
> + pwms = <&pwm2 0 50000>;
> + };
> +
> + green {
> + label = "green:status";
> + max-brightness = <248>;
> + pwms = <&pwm4 0 50000>;
> + };
> +
> + red {
> + label = "red:status";
> + max-brightness = <248>;
> + pwms = <&pwm3 0 50000>;
> + };
> + };
> +
> + reg_aud_1v8: regulator-audio-1v8 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audiopwr>;
> + regulator-name = "AUDIO_PWR_EN";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_gnss: regulator-gnss {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gnsspwr>;
> + regulator-name = "GNSS";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_hub: regulator-hub {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hub_pwr>;
> + regulator-name = "HUB";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_lcd_3v4: regulator-lcd-3v4 {
> + compatible = "regulator-fixed";
> + regulator-name = "LCD_3V4";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_dsibiasen>;
> + vin-supply = <®_vsys_3v4>;
> + enable-active-high;
Nit: can we consistently put 'enable-active-high' after 'gpio' node?
> + gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
> + };
> +
> + reg_vdd_sen: regulator-vdd-sen {
> + compatible = "regulator-fixed";
> + regulator-name = "VDD_SEN";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + reg_vdd_3v3: regulator-vdd-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + reg_vdd_1v8: regulator-vdd-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + reg_vsys_3v4: regulator-vsys-3v4 {
> + compatible = "regulator-fixed";
> + regulator-name = "VSYS_3V4";
> + regulator-min-microvolt = <3400000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-always-on;
> + };
> +
> + reg_wifi_3v3: regulator-wifi-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3_WIFI";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + pinctrl-0 = <&pinctrl_hp>;
> + simple-audio-card,name = "Librem 5";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Headphone", "Headphones",
> + "Microphone", "Headset Mic",
> + "Microphone", "Digital Mic",
> + "Speaker", "Speaker";
> + simple-audio-card,routing =
> + "Headphones", "HPOUTL",
> + "Headphones", "HPOUTR",
> + "Speaker", "SPKOUTL",
> + "Speaker", "SPKOUTR",
> + "Headset Mic", "MICBIAS",
> + "IN3R", "Headset Mic",
> + "DMICDAT", "Digital Mic";
> + simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai2>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&codec>;
> + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> + frame-master;
> + bitclock-master;
> + };
> + };
> +
> + sound-wwan {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "Modem";
> + simple-audio-card,format = "i2s";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai6>;
> + frame-inversion;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&bm818_codec>;
> + frame-master;
> + bitclock-master;
> + };
> + };
> +
> + bm818_codec: sound-wwan-codec {
> + compatible = "broadmobi,bm818", "option,gtm601";
> + #sound-dai-cells = <0>;
> + };
> +
> + vibrator {
> + compatible = "pwm-vibrator";
> + pwms = <&pwm1 0 1000000000 0>;
> + pwm-names = "enable";
> + vcc-supply = <®_vdd_3v3>;
> + };
> +};
> +
> +&A53_0 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&A53_1 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&A53_2 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&A53_3 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&ddrc {
> + operating-points-v2 = <&ddrc_opp_table>;
> +
> + ddrc_opp_table: ddrc-opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-25M {
> + opp-hz = /bits/ 64 <25000000>;
> + };
Have a newline between nodes.
> + opp-100M {
> + opp-hz = /bits/ 64 <100000000>;
> + };
> + opp-800M {
> + opp-hz = /bits/ 64 <800000000>;
> + };
> + };
> +};
> +
> +&dphy {
> + status = "okay";
> +};
> +
> +&ecspi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + nor_flash: flash at 0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + };
> +};
> +
> +&gpio1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pmic_5v>;
> +
> + pmic-5v {
> + gpio-hog;
> + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
> + input;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_audiopwr: audiopwrgrp {
> + fsl,pins = <
> + /* AUDIO_POWER_EN_3V3 */
> + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x83
> + >;
> + };
> +
> + pinctrl_bl: blgrp {
> + fsl,pins = <
> + /* BACKLINGE_EN */
> + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x83
> + >;
> + };
> +
> + pinctrl_charger_in: chargeringrp {
> + fsl,pins = <
> + /* CHRG_INT */
> + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80
> + /* CHG_STATUS_B */
> + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80
> + >;
> + };
> +
> + pinctrl_dsibiasen: dsibiasengrp {
> + fsl,pins = <
> + /* DSI_BIAS_EN */
> + MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20 0x83
> + >;
> + };
> +
> + pinctrl_dsien: dsiengrp {
> + fsl,pins = <
> + /* DSI_EN_3V3 */
> + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x83
> + >;
> + };
> +
> + pinctrl_ecspi1: spi1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83
> + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x83
> + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19
> + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x83
> + >;
> + };
> +
> + pinctrl_gauge: gaugegrp {
> + fsl,pins = <
> + /* BAT_LOW */
> + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x80
> + >;
> + };
> +
> + pinctrl_gnsspwr: gnsspwrgrp {
> + fsl,pins = <
> + /* GPS3V3_EN */
> + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x83
> + >;
> + };
> +
> + pinctrl_haptic: hapticgrp {
> + fsl,pins = <
> + /* MOTO */
> + MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x83
> + >;
> + };
> +
> + pinctrl_hp: hpgrp {
> + fsl,pins = <
> + /* HEADPHONE_DET_1V8 */
> + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x180
> + >;
> + };
> +
> + pinctrl_hub_pwr: hubpwrgrp {
> + fsl,pins = <
> + /* HUB_PWR_3V3_EN */
> + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x83
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000026
> + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000026
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000026
> + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000026
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000026
> + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000026
> + >;
> + };
> +
> + pinctrl_i2c4: i2c4grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000026
> + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000026
> + >;
> + };
> +
> + pinctrl_keys: keysgrp {
> + fsl,pins = <
> + /* VOL- */
> + MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17 0x01C0
> + /* VOL+ */
> + MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16 0x01C0
> + >;
> + };
> +
> + pinctrl_led_b: ledbgrp {
> + fsl,pins = <
> + /* LED_B */
> + MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x06
> + >;
> + };
> +
> + pinctrl_led_g: ledggrp {
> + fsl,pins = <
> + /* LED_G */
> + MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT 0x06
> + >;
> + };
> +
> + pinctrl_led_r: ledrgrp {
> + fsl,pins = <
> + /* LED_R */
> + MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT 0x06
> + >;
> + };
> +
> + pinctrl_mag: maggrp {
> + fsl,pins = <
> + /* INT_MAG */
> + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x80
> + >;
> + };
> +
> + pinctrl_pmic: pmicgrp {
> + fsl,pins = <
> + /* PMIC_NINT */
> + MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x80
> + >;
> + };
> +
> + pinctrl_pmic_5v: pmic5vgrp {
> + fsl,pins = <
> + /* PMIC_5V */
> + MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x80
> + >;
> + };
> +
> + pinctrl_prox: proxgrp {
> + fsl,pins = <
> + /* INT_LIGHT */
> + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x80
> + >;
> + };
> +
> + pinctrl_rtc: rtcgrp {
> + fsl,pins = <
> + /* RTC_INT */
> + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80
> + >;
> + };
> +
> + pinctrl_sai2: sai2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
> + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
> + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
> + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
> + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
> + >;
> + };
> +
> + pinctrl_sai6: sai6grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6
> + MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6
> + MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6
> + MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6
> + >;
> + };
> +
> + pinctrl_tcpc: tcpcgrp {
> + fsl,pins = <
> + /* TCPC_INT */
> + MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x01C0
> + >;
> + };
> +
> + pinctrl_typec: typecgrp {
> + fsl,pins = <
> + /* TYPEC_MUX_EN */
> + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x83
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
> + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
> + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
> + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49
> + MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49
> + MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49
> + MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
> + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
> + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf
> + MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + /* nWDOG */
> + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x1f
> + >;
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <387000>;
This frequency setting looks special. Why cannot it be 400k?
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + typec_pd: usb-pd at 3f {
> + compatible = "ti,tps6598x";
> + reg = <0x3f>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> +
> + connector {
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> +
> + usb_con_hs: endpoint {
> + remote-endpoint = <&typec_hs>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + usb_con_ss: endpoint {
> + remote-endpoint = <&typec_ss>;
> + };
> + };
> + };
> + };
> + };
> +
> + pmic: pmic at 4b {
> + compatible = "rohm,bd71837";
> + reg = <0x4b>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pmic>;
> + clocks = <&pmic_osc>;
> + clock-names = "osc";
> + clock-output-names = "pmic_clk";
> + interrupt-parent = <&gpio1>;
> + interrupts = <7 GPIO_ACTIVE_LOW>;
> + interrupt-names = "irq";
> + rohm,reset-snvs-powered;
> +
> + regulators {
> + buck1_reg: BUCK1 {
> + regulator-name = "BUCK1";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-ramp-delay = <1250>;
> + rohm,dvs-run-voltage = <900000>;
> + rohm,dvs-idle-voltage = <850000>;
> + rohm,dvs-suspend-voltage = <800000>;
> + regulator-always-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "BUCK2";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-ramp-delay = <1250>;
> + rohm,dvs-run-voltage = <1000000>;
> + rohm,dvs-idle-voltage = <900000>;
> + regulator-always-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "BUCK3";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + rohm,dvs-run-voltage = <900000>;
> + regulator-always-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "BUCK4";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + rohm,dvs-run-voltage = <1000000>;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "BUCK5";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "BUCK6";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "BUCK7";
> + regulator-min-microvolt = <1605000>;
> + regulator-max-microvolt = <1995000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "BUCK8";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + };
> +
> + ldo1_reg: LDO1 {
> + regulator-name = "LDO1";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + /* leave on for snvs power button */
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "LDO2";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + /* leave on for snvs power button */
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "LDO3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "LDO4";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo5_reg: LDO5 {
> + /* VDD_PHY_0V9 - MIPI and HDMI domains */
> + regulator-name = "LDO5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + ldo6_reg: LDO6 {
> + /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */
> + regulator-name = "LDO6";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + /* VDD_PHY_3V3 - USB domain */
> + regulator-name = "LDO7";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +
> + rtc at 68 {
> + compatible = "microcrystal,rv4162";
> + reg = <0x68>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rtc>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <387000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + magnetometer at 1e {
> + compatible = "st,lsm9ds1-magn";
> + reg = <0x1e>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mag>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
> + vdd-supply = <®_vdd_sen>;
> + vddio-supply = <®_vdd_1v8>;
> + };
> +
> + regulator at 3e {
> + compatible = "tps65132";
> + reg = <0x3e>;
Have a newline between property list and child node.
> + outp {
> + regulator-name = "LCD_AVDD";
> + vin-supply = <®_lcd_3v4>;
> + };
> +
> + outn {
> + regulator-name = "LCD_AVEE";
> + vin-supply = <®_lcd_3v4>;
> + };
> + };
> +
> + flash at 53 {
> + compatible = "lm3560";
> + reg = <0x53>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + flash at 0 {
> + reg = <0x0>;
> + flash-timeout-us = <150000>;
> + flash-max-microamp = <320000>;
> + led-max-microamp = <60000>;
> + label = "flash";
> + };
> +
> + torch at 1 {
> + reg = <0x1>;
> + led-max-microamp = <10000>;
> + label = "torch";
> + };
> +
> + };
> +
> + prox at 60 {
> + compatible = "vishay,vcnl4040";
> + reg = <0x60>;
> + pinctrl-0 = <&pinctrl_prox>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + accel-gyro at 6a {
> + compatible = "st,lsm9ds1-imu";
> + reg = <0x6a>;
> + vdd-supply = <®_vdd_sen>;
> + vddio-supply = <®_vdd_1v8>;
> + mount-matrix = "1", "0", "0",
> + "0", "1", "0",
> + "0", "0", "-1";
> + };
> +};
> +
> +&i2c3 {
> + clock-frequency = <387000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + codec: audio-codec at 1a {
> + compatible = "wlf,wm8962";
> + reg = <0x1a>; // 0x4a is the test address
> + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
> + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <24576000>;
> + #sound-dai-cells = <0>;
> + mic-cfg = <0x200>;
> + DCVDD-supply = <®_aud_1v8>;
> + DBVDD-supply = <®_aud_1v8>;
> + AVDD-supply = <®_aud_1v8>;
> + CPVDD-supply = <®_aud_1v8>;
> + MICVDD-supply = <®_aud_1v8>;
> + PLLVDD-supply = <®_aud_1v8>;
> + SPKVDD1-supply = <®_vsys_3v4>;
> + SPKVDD2-supply = <®_vsys_3v4>;
> + gpio-cfg = <
> + 0x0000 /* n/c */
> + 0x0001 /* gpio2, 1: default */
> + 0x0013 /* gpio3, 2: dmicclk */
> + 0x0000 /* n/c, 3: default */
> + 0x8014 /* gpio5, 4: dmic_dat */
> + 0x0000 /* gpio6, 5: default */
> + >;
> + };
> +
> + backlight at 36 {
> + compatible = "ti,lm36922";
> + reg = <0x36>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_bl>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
Drop this newline.
Shawn
> + enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
> + vled-supply = <®_vsys_3v4>;
> + ti,ovp-microvolt = <25000000>;
> +
> + led_backlight: led at 0 {
> + reg = <0>;
> + label = ":backlight";
> + linux,default-trigger = "backlight";
> + led-max-microamp = <20000>;
> + };
> + };
> +
> + touchscreen at 38 {
> + compatible = "edt,edt-ft5506";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> + touchscreen-size-x = <720>;
> + touchscreen-size-y = <1440>;
> + };
> +};
> +
> +&i2c4 {
> + clock-frequency = <387000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c4>;
> + status = "okay";
> +
> + bat: fuel-gauge at 36 {
> + compatible = "maxim,max17055";
> + reg = <0x36>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gauge>;
> + maxim,over-heat-temp = <700>;
> + maxim,over-volt = <4500>;
> + maxim,rsns-microohm = <5000>;
> + };
> +
> + charger at 6a {
> + compatible = "ti,bq25890";
> + reg = <0x6a>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_charger_in>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> + phys = <&usb3_phy0>;
> + ti,battery-regulation-voltage = <4192000>; /* uV */
> + ti,charge-current = <1600000>; /* uA */
> + ti,termination-current = <66000>; /* uA */
> + ti,precharge-current = <130000>; /* uA */
> + ti,minimum-sys-voltage = <3700000>; /* uV */
> + ti,boost-voltage = <5000000>; /* uV */
> + ti,boost-max-current = <50000>; /* uA */
> + ti,use-vinmin-threshold = <1>; /* enable VINDPM */
> + ti,vinmin-threshold = <3900000>; /* uV */
> + monitored-battery = <&bat>;
> + };
> +};
> +
> +&pgc_gpu {
> + power-supply = <&buck3_reg>;
> +};
> +
> +&pgc_mipi {
> + power-supply = <&ldo5_reg>;
> +};
> +
> +&pgc_vpu {
> + power-supply = <&buck4_reg>;
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_haptic>;
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_led_b>;
> + status = "okay";
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_led_g>;
> + status = "okay";
> +};
> +
> +&pwm4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_led_r>;
> + status = "okay";
> +};
> +
> +&sai2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai2>;
> + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
> + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <24576000>;
> + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
> + assigned-clock-rates = <786432000>, <722534400>;
> + status = "okay";
> +};
> +
> +&sai6 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai6>;
> + assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
> + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <24576000>;
> + fsl,sai-synchronous-rx;
> + status = "okay";
> +};
> +
> +&snvs_pwrkey {
> + status = "okay";
> +};
> +
> +&snvs_rtc {
> + status = "disabled";
> +};
> +
> +&uart1 { /* console */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&uart2 { /* TPS - GPS - DEBUG */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +
> + gnss {
> + compatible = "globaltop,pa6h";
> + vcc-supply = <®_gnss>;
> + current-speed = <9600>;
> + };
> +};
> +
> +&uart3 { /* SMC */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + status = "okay";
> +};
> +
> +&uart4 { /* BT */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&usb3_phy0 {
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + vbus-supply = <®_hub>;
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dr_mode = "otg";
> + snps,dis_u3_susphy_quirk;
> + status = "okay";
> +
> + port at 0 {
> + reg = <0>;
> +
> + typec_hs: endpoint {
> + remote-endpoint = <&usb_con_hs>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + typec_ss: endpoint {
> + remote-endpoint = <&usb_con_ss>;
> + };
> + };
> +};
> +
> +&usb_dwc3_1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + bus-width = <8>;
> + vmmc-supply = <®_vdd_3v3>;
> + power-supply = <®_vdd_1v8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
> + bus-width = <4>;
> + vmmc-supply = <®_wifi_3v3>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + cap-sdio-irq;
> + keep-power-in-suspend;
> + wakeup-source;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> --
> 2.20.1
>
More information about the linux-arm-kernel
mailing list