[PATCH v5 3/5] net: macb: fix macb_get/set_wol() when moving to phylink

nicolas.ferre at microchip.com nicolas.ferre at microchip.com
Fri Jul 10 08:46:43 EDT 2020


From: Nicolas Ferre <nicolas.ferre at microchip.com>

Keep previous function goals and integrate phylink actions to them.

phylink_ethtool_get_wol() is not enough to figure out if Ethernet driver
supports Wake-on-Lan.
Initialization of "supported" and "wolopts" members is done in phylink
function, no need to keep them in calling function.

phylink_ethtool_set_wol() return value is considered and determines
if the MAC has to handle WoL or not. The case where the PHY doesn't
implement WoL leads to the MAC configuring it to provide this feature.

Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Cc: Claudiu Beznea <claudiu.beznea at microchip.com>
Cc: Harini Katakam <harini.katakam at xilinx.com>
Cc: Antoine Tenart <antoine.tenart at bootlin.com>
Cc: Florian Fainelli <f.fainelli at gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre at microchip.com>
---
Changes in v5:
- Addressed the error code returned by phylink_ethtool_set_wol() as suggested
  by Russell.
  If PHY handles WoL, MAC doesn't stay in the way.
- Removed Florian's tag

 drivers/net/ethernet/cadence/macb_main.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 4cafe343c0a2..79c2fe054303 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -2821,11 +2821,13 @@ static void macb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 {
 	struct macb *bp = netdev_priv(netdev);
 
-	wol->supported = 0;
-	wol->wolopts = 0;
-
-	if (bp->wol & MACB_WOL_HAS_MAGIC_PACKET)
+	if (bp->wol & MACB_WOL_HAS_MAGIC_PACKET) {
 		phylink_ethtool_get_wol(bp->phylink, wol);
+		wol->supported |= WAKE_MAGIC;
+
+		if (bp->wol & MACB_WOL_ENABLED)
+			wol->wolopts |= WAKE_MAGIC;
+	}
 }
 
 static int macb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
@@ -2833,9 +2835,13 @@ static int macb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct macb *bp = netdev_priv(netdev);
 	int ret;
 
+	/* Pass the order to phylink layer */
 	ret = phylink_ethtool_set_wol(bp->phylink, wol);
-	if (!ret)
-		return 0;
+	/* Don't manage WoL on MAC if handled by the PHY
+	 * or if there's a failure in talking to the PHY
+	 */
+	if (!ret || ret != -EOPNOTSUPP)
+		return ret;
 
 	if (!(bp->wol & MACB_WOL_HAS_MAGIC_PACKET) ||
 	    (wol->wolopts & ~WAKE_MAGIC))
-- 
2.27.0




More information about the linux-arm-kernel mailing list