[PATCH v5 4/5] dt-bindings: display: imx: add bindings for DCSS

Rob Herring robh at kernel.org
Thu Jul 9 18:57:59 EDT 2020


On Thu, Jul 09, 2020 at 07:47:32PM +0300, Laurentiu Palcu wrote:
> From: Laurentiu Palcu <laurentiu.palcu at nxp.com>
> 
> Add bindings for iMX8MQ Display Controller Subsystem.
> 
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu at nxp.com>
> ---
>  .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> new file mode 100644
> index 000000000000..a951409cf76d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 NXP
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: iMX8MQ Display Controller Subsystem (DCSS)
> +
> +maintainers:
> +  - Laurentiu Palcu <laurentiu.palcu at nxp.com>
> +
> +description:
> +
> +  The DCSS (display controller sub system) is used to source up to three
> +  display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
> +  2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10
> +  image processing capabilities are included to provide a solution capable of
> +  driving next generation high dynamic range displays.
> +
> +properties:
> +  compatible:
> +    const: nxp,imx8mq-dcss
> +
> +  reg:
> +    items:
> +      - description: DCSS base address and size, up to IRQ steer start
> +      - description: DCSS BLKCTL base address and size
> +
> +  interrupts:
> +    items:
> +      - description: Context loader completion and error interrupt
> +      - description: DTG interrupt used to signal context loader trigger time
> +      - description: DTG interrupt for Vblank
> +
> +  interrupt-names:
> +    items:
> +      - const: ctxld
> +      - const: ctxld_kick
> +      - const: vblank
> +
> +  clocks:
> +    items:
> +      - description: Display APB clock for all peripheral PIO access interfaces
> +      - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
> +      - description: RTRAM clock
> +      - description: Pixel clock, can be driver either by HDMI phy clock or MIPI
> +      - description: DTRC clock, needed by video decompressor
> +
> +  clock-names:
> +    items:
> +      - const: apb
> +      - const: axi
> +      - const: rtrm
> +      - const: pix
> +      - const: dtrc
> +
> +  port:
> +    type: object
> +    description:
> +      A port node pointing to the input port of a HDMI/DP or MIPI display bridge.

additionalProperties: false

With that,

Reviewed-by: Rob Herring <robh at kernel.org>



More information about the linux-arm-kernel mailing list