[PATCH v2] serial: mxs-auart: add missed iounmap() in probe failure and remove

[Chuhong Yuan]

This driver calls ioremap() in probe, but it misses calling iounmap() in 
probe's error handler and remove.
Add the missed calls to fix it.

Fixes: 47d37d6f94cc ("serial: Add auart driver for i.MX23/28")
Signed-off-by: Chuhong Yuan <hslester96 at gmail.com>
---
Changes in v2:
  - Use iounmap() instead of devm_ioremap() to fix the bugs.
  - Modify the subject and the description.

 drivers/tty/serial/mxs-auart.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index b4f835e7de23..b784323a6a7b 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1698,21 +1698,21 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = irq;
-		goto out_disable_clks;
+		goto out_iounmap;
 	}
 
 	s->port.irq = irq;
 	ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
 			       dev_name(&pdev->dev), s);
 	if (ret)
-		goto out_disable_clks;
+		goto out_iounmap;
 
 	platform_set_drvdata(pdev, s);
 
 	ret = mxs_auart_init_gpios(s, &pdev->dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize GPIOs.\n");
-		goto out_disable_clks;
+		goto out_iounmap;
 	}
 
 	/*
@@ -1720,7 +1720,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	 */
 	ret = mxs_auart_request_gpio_irq(s);
 	if (ret)
-		goto out_disable_clks;
+		goto out_iounmap;
 
 	auart_port[s->port.line] = s;
 
@@ -1746,6 +1746,9 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	mxs_auart_free_gpio_irq(s);
 	auart_port[pdev->id] = NULL;
 
+out_iounmap:
+	iounmap(s->port.membase);
+
 out_disable_clks:
 	if (is_asm9260_auart(s)) {
 		clk_disable_unprepare(s->clk);
@@ -1761,6 +1764,7 @@ static int mxs_auart_remove(struct platform_device *pdev)
 	uart_remove_one_port(&auart_driver, &s->port);
 	auart_port[pdev->id] = NULL;
 	mxs_auart_free_gpio_irq(s);
+	iounmap(s->port.membase);
 	if (is_asm9260_auart(s)) {
 		clk_disable_unprepare(s->clk);
 		clk_disable_unprepare(s->clk_ahb);
-- 
2.26.2