[EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support for fsl-mc
Diana Craciun OSS
diana.craciun at oss.nxp.com
Thu Jul 9 06:47:07 EDT 2020
On 7/9/2020 1:37 PM, Makarand Pawagi wrote:
>
>> -----Original Message-----
>> From: Laurentiu Tudor <laurentiu.tudor at nxp.com>
>> Sent: Thursday, July 9, 2020 3:45 PM
>> To: Makarand Pawagi <makarand.pawagi at nxp.com>; Lorenzo Pieralisi
>> <lorenzo.pieralisi at arm.com>
>> Cc: linux-arm-kernel at lists.infradead.org; Diana Madalina Craciun (OSS)
>> <diana.craciun at oss.nxp.com>; iommu at lists.linux-foundation.org; linux-
>> acpi at vger.kernel.org; devicetree at vger.kernel.org; linux-pci at vger.kernel.org;
>> Rob Herring <robh+dt at kernel.org>; Rafael J. Wysocki <rjw at rjwysocki.net>;
>> Joerg Roedel <joro at 8bytes.org>; Hanjun Guo <guohanjun at huawei.com>; Bjorn
>> Helgaas <bhelgaas at google.com>; Sudeep Holla <sudeep.holla at arm.com>;
>> Robin Murphy <robin.murphy at arm.com>; Catalin Marinas
>> <catalin.marinas at arm.com>; Will Deacon <will at kernel.org>; Marc Zyngier
>> <maz at kernel.org>
>> Subject: Re: [EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support for fsl-mc
>>
>>
>>
>> On 7/9/2020 12:26 PM, Makarand Pawagi wrote:
>>>
>>>> -----Original Message-----
>>>> From: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
>>>> Sent: Thursday, July 9, 2020 2:50 PM
>>>> To: Laurentiu Tudor <laurentiu.tudor at nxp.com>
>>>> Cc: linux-arm-kernel at lists.infradead.org; Makarand Pawagi
>>>> <makarand.pawagi at nxp.com>; Diana Madalina Craciun (OSS)
>>>> <diana.craciun at oss.nxp.com>; iommu at lists.linux-foundation.org; linux-
>>>> acpi at vger.kernel.org; devicetree at vger.kernel.org;
>>>> linux-pci at vger.kernel.org; Rob Herring <robh+dt at kernel.org>; Rafael
>>>> J. Wysocki <rjw at rjwysocki.net>; Joerg Roedel <joro at 8bytes.org>;
>>>> Hanjun Guo <guohanjun at huawei.com>; Bjorn Helgaas
>>>> <bhelgaas at google.com>; Sudeep Holla <sudeep.holla at arm.com>; Robin
>>>> Murphy <robin.murphy at arm.com>; Catalin Marinas
>>>> <catalin.marinas at arm.com>; Will Deacon <will at kernel.org>; Marc
>>>> Zyngier <maz at kernel.org>
>>>> Subject: [EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support for
>>>> fsl-mc
>>>>
>>>> Caution: EXT Email
>>>>
>>>> On Wed, Jul 01, 2020 at 07:55:28PM +0300, Laurentiu Tudor wrote:
>>>>>
>>>>> On 6/19/2020 11:20 AM, Lorenzo Pieralisi wrote:
>>>>>> From: Makarand Pawagi <makarand.pawagi at nxp.com>
>>>>>>
>>>>>> Add ACPI support in the fsl-mc driver. Driver parses MC DSDT table
>>>>>> to extract memory and other resources.
>>>>>>
>>>>>> Interrupt (GIC ITS) information is extracted from the MADT table by
>>>>>> drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c.
>>>>>>
>>>>>> IORT table is parsed to configure DMA.
>>>>>>
>>>>>> Signed-off-by: Makarand Pawagi <makarand.pawagi at nxp.com>
>>>>>> Signed-off-by: Diana Craciun <diana.craciun at oss.nxp.com>
>>>>>> Signed-off-by: Laurentiu Tudor <laurentiu.tudor at nxp.com>
>>>>>> ---
>>>>>> drivers/bus/fsl-mc/fsl-mc-bus.c | 73 ++++++++++++----
>>>>>> drivers/bus/fsl-mc/fsl-mc-msi.c | 37 +++++----
>>>>>> drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c | 92
>>>>>> ++++++++++++++++-----
>>>>>> 3 files changed, 150 insertions(+), 52 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c
>>>>>> b/drivers/bus/fsl-mc/fsl-mc-bus.c index 824ff77bbe86..324d49d6df89
>>>>>> 100644
>>>>>> --- a/drivers/bus/fsl-mc/fsl-mc-bus.c
>>>>>> +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
>>>>>> @@ -18,6 +18,8 @@
>>>>>> #include <linux/bitops.h>
>>>>>> #include <linux/msi.h>
>>>>>> #include <linux/dma-mapping.h>
>>>>>> +#include <linux/acpi.h>
>>>>>> +#include <linux/iommu.h>
>>>>>>
>>>>>> #include "fsl-mc-private.h"
>>>>>>
>>>>>> @@ -38,6 +40,7 @@ struct fsl_mc {
>>>>>> struct fsl_mc_device *root_mc_bus_dev;
>>>>>> u8 num_translation_ranges;
>>>>>> struct fsl_mc_addr_translation_range *translation_ranges;
>>>>>> + void *fsl_mc_regs;
>>>>>> };
>>>>>>
>>>>>> /**
>>>>>> @@ -56,6 +59,10 @@ struct fsl_mc_addr_translation_range {
>>>>>> phys_addr_t start_phys_addr;
>>>>>> };
>>>>>>
>>>>>> +#define FSL_MC_FAPR 0x28
>>>>>> +#define MC_FAPR_PL BIT(18)
>>>>>> +#define MC_FAPR_BMT BIT(17)
>>>>>> +
>>>>>> /**
>>>>>> * fsl_mc_bus_match - device to driver matching callback
>>>>>> * @dev: the fsl-mc device to match against @@ -124,7 +131,10 @@
>>>>>> static int fsl_mc_dma_configure(struct device *dev)
>>>>>> while (dev_is_fsl_mc(dma_dev))
>>>>>> dma_dev = dma_dev->parent;
>>>>>>
>>>>>> - return of_dma_configure_id(dev, dma_dev->of_node, 0, &input_id);
>>>>>> + if (dev_of_node(dma_dev))
>>>>>> + return of_dma_configure_id(dev, dma_dev->of_node, 0,
>>>>>> + &input_id);
>>>>>> +
>>>>>> + return acpi_dma_configure_id(dev, DEV_DMA_COHERENT, &input_id);
>>>>>> }
>>>>>>
>>>>>> static ssize_t modalias_show(struct device *dev, struct
>>>>>> device_attribute *attr, @@ -865,8 +875,11 @@ static int
>>>> fsl_mc_bus_probe(struct platform_device *pdev)
>>>>>> struct fsl_mc_io *mc_io = NULL;
>>>>>> int container_id;
>>>>>> phys_addr_t mc_portal_phys_addr;
>>>>>> - u32 mc_portal_size;
>>>>>> - struct resource res;
>>>>>> + u32 mc_portal_size, mc_stream_id;
>>>>>> + struct resource *plat_res;
>>>>>> +
>>>>>> + if (!iommu_present(&fsl_mc_bus_type))
>>>>>> + return -EPROBE_DEFER;
>>>>>>
>>>>>> mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
>>>>>> if (!mc)
>>>>>> @@ -874,19 +887,33 @@ static int fsl_mc_bus_probe(struct
>>>>>> platform_device *pdev)
>>>>>>
>>>>>> platform_set_drvdata(pdev, mc);
>>>>>>
>>>>>> + plat_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>>>>>> + mc->fsl_mc_regs = devm_ioremap_resource(&pdev->dev, plat_res);
>>>>>> + if (IS_ERR(mc->fsl_mc_regs))
>>>>>> + return PTR_ERR(mc->fsl_mc_regs);
>>>>>> +
>>>>>> + if (IS_ENABLED(CONFIG_ACPI) && !dev_of_node(&pdev->dev)) {
>>>>>> + mc_stream_id = readl(mc->fsl_mc_regs + FSL_MC_FAPR);
>>>>>> + /*
>>>>>> + * HW ORs the PL and BMT bit, places the result in bit 15 of
>>>>>> + * the StreamID and ORs in the ICID. Calculate it accordingly.
>>>>>> + */
>>>>>> + mc_stream_id = (mc_stream_id & 0xffff) |
>>>>>> + ((mc_stream_id & (MC_FAPR_PL | MC_FAPR_BMT)) ?
>>>>>> + 0x4000 : 0);
>>>>>> + error = acpi_dma_configure_id(&pdev->dev, DEV_DMA_COHERENT,
>>>>>> + &mc_stream_id);
>>>>>> + if (error)
>>>>>> + dev_warn(&pdev->dev, "failed to configure dma: %d.\n",
>>>>>> + error);
>>>>>> + }
>>>>>> +
>>>>>> /*
>>>>>> * Get physical address of MC portal for the root DPRC:
>>>>>> */
>>>>>> - error = of_address_to_resource(pdev->dev.of_node, 0, &res);
>>>>>> - if (error < 0) {
>>>>>> - dev_err(&pdev->dev,
>>>>>> - "of_address_to_resource() failed for %pOF\n",
>>>>>> - pdev->dev.of_node);
>>>>>> - return error;
>>>>>> - }
>>>>>> -
>>>>>> - mc_portal_phys_addr = res.start;
>>>>>> - mc_portal_size = resource_size(&res);
>>>>>> + plat_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>>> + mc_portal_phys_addr = plat_res->start;
>>>>>> + mc_portal_size = resource_size(plat_res);
>>>>>> error = fsl_create_mc_io(&pdev->dev, mc_portal_phys_addr,
>>>>>> mc_portal_size, NULL,
>>>>>> FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
>>>>>> &mc_io); @@ -903,11 +930,13 @@ static int fsl_mc_bus_probe(struct
>>>> platform_device *pdev)
>>>>>> dev_info(&pdev->dev, "MC firmware version: %u.%u.%u\n",
>>>>>> mc_version.major, mc_version.minor,
>>>>>> mc_version.revision);
>>>>>>
>>>>>> - error = get_mc_addr_translation_ranges(&pdev->dev,
>>>>>> - &mc->translation_ranges,
>>>>>> - &mc->num_translation_ranges);
>>>>>> - if (error < 0)
>>>>>> - goto error_cleanup_mc_io;
>>>>>> + if (dev_of_node(&pdev->dev)) {
>>>>>> + error = get_mc_addr_translation_ranges(&pdev->dev,
>>>>>> + &mc->translation_ranges,
>>>>>> + &mc->num_translation_ranges);
>>>>>> + if (error < 0)
>>>>>> + goto error_cleanup_mc_io;
>>>>>> + }
>>>>>>
>>>>>> error = dprc_get_container_id(mc_io, 0, &container_id);
>>>>>> if (error < 0) {
>>>>>> @@ -934,6 +963,7 @@ static int fsl_mc_bus_probe(struct
>>>>>> platform_device
>>>> *pdev)
>>>>>> goto error_cleanup_mc_io;
>>>>>>
>>>>>> mc->root_mc_bus_dev = mc_bus_dev;
>>>>>> + mc_bus_dev->dev.fwnode = pdev->dev.fwnode;
>>>>> Makarand, this looks a bit weird. Is there really a reason for it?
>>>> Can you clarify please so that we can reach a conclusion on this matter ?
>>>>
>>> Laurentiu, can you clarify what exactly is the doubt here? Are you asking about
>> fwnode assignment from pdev to mc_bus_dev?
>> Yes. I remember that a while ago I tested without this fwnode assignment and
>> didn't encounter any issues. Maybe we can just drop it?
> Did you tested with PHY changes? Because this is needed for MAC driver, where it needs the mc bus node.
Maybe it worth a comment or maybe have it in a different patch?
Thanks,
Diana
>
>> ---
>> Best Regards, Laurentiu
More information about the linux-arm-kernel
mailing list