[EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support for fsl-mc

Makarand Pawagi makarand.pawagi at nxp.com
Thu Jul 9 06:37:47 EDT 2020



> -----Original Message-----
> From: Laurentiu Tudor <laurentiu.tudor at nxp.com>
> Sent: Thursday, July 9, 2020 3:45 PM
> To: Makarand Pawagi <makarand.pawagi at nxp.com>; Lorenzo Pieralisi
> <lorenzo.pieralisi at arm.com>
> Cc: linux-arm-kernel at lists.infradead.org; Diana Madalina Craciun (OSS)
> <diana.craciun at oss.nxp.com>; iommu at lists.linux-foundation.org; linux-
> acpi at vger.kernel.org; devicetree at vger.kernel.org; linux-pci at vger.kernel.org;
> Rob Herring <robh+dt at kernel.org>; Rafael J. Wysocki <rjw at rjwysocki.net>;
> Joerg Roedel <joro at 8bytes.org>; Hanjun Guo <guohanjun at huawei.com>; Bjorn
> Helgaas <bhelgaas at google.com>; Sudeep Holla <sudeep.holla at arm.com>;
> Robin Murphy <robin.murphy at arm.com>; Catalin Marinas
> <catalin.marinas at arm.com>; Will Deacon <will at kernel.org>; Marc Zyngier
> <maz at kernel.org>
> Subject: Re: [EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support for fsl-mc
> 
> 
> 
> On 7/9/2020 12:26 PM, Makarand Pawagi wrote:
> >
> >
> >> -----Original Message-----
> >> From: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> >> Sent: Thursday, July 9, 2020 2:50 PM
> >> To: Laurentiu Tudor <laurentiu.tudor at nxp.com>
> >> Cc: linux-arm-kernel at lists.infradead.org; Makarand Pawagi
> >> <makarand.pawagi at nxp.com>; Diana Madalina Craciun (OSS)
> >> <diana.craciun at oss.nxp.com>; iommu at lists.linux-foundation.org; linux-
> >> acpi at vger.kernel.org; devicetree at vger.kernel.org;
> >> linux-pci at vger.kernel.org; Rob Herring <robh+dt at kernel.org>; Rafael
> >> J. Wysocki <rjw at rjwysocki.net>; Joerg Roedel <joro at 8bytes.org>;
> >> Hanjun Guo <guohanjun at huawei.com>; Bjorn Helgaas
> >> <bhelgaas at google.com>; Sudeep Holla <sudeep.holla at arm.com>; Robin
> >> Murphy <robin.murphy at arm.com>; Catalin Marinas
> >> <catalin.marinas at arm.com>; Will Deacon <will at kernel.org>; Marc
> >> Zyngier <maz at kernel.org>
> >> Subject: [EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support for
> >> fsl-mc
> >>
> >> Caution: EXT Email
> >>
> >> On Wed, Jul 01, 2020 at 07:55:28PM +0300, Laurentiu Tudor wrote:
> >>>
> >>>
> >>> On 6/19/2020 11:20 AM, Lorenzo Pieralisi wrote:
> >>>> From: Makarand Pawagi <makarand.pawagi at nxp.com>
> >>>>
> >>>> Add ACPI support in the fsl-mc driver. Driver parses MC DSDT table
> >>>> to extract memory and other resources.
> >>>>
> >>>> Interrupt (GIC ITS) information is extracted from the MADT table by
> >>>> drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c.
> >>>>
> >>>> IORT table is parsed to configure DMA.
> >>>>
> >>>> Signed-off-by: Makarand Pawagi <makarand.pawagi at nxp.com>
> >>>> Signed-off-by: Diana Craciun <diana.craciun at oss.nxp.com>
> >>>> Signed-off-by: Laurentiu Tudor <laurentiu.tudor at nxp.com>
> >>>> ---
> >>>>  drivers/bus/fsl-mc/fsl-mc-bus.c             | 73 ++++++++++++----
> >>>>  drivers/bus/fsl-mc/fsl-mc-msi.c             | 37 +++++----
> >>>>  drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c | 92
> >>>> ++++++++++++++++-----
> >>>>  3 files changed, 150 insertions(+), 52 deletions(-)
> >>>>
> >>>> diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c
> >>>> b/drivers/bus/fsl-mc/fsl-mc-bus.c index 824ff77bbe86..324d49d6df89
> >>>> 100644
> >>>> --- a/drivers/bus/fsl-mc/fsl-mc-bus.c
> >>>> +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
> >>>> @@ -18,6 +18,8 @@
> >>>>  #include <linux/bitops.h>
> >>>>  #include <linux/msi.h>
> >>>>  #include <linux/dma-mapping.h>
> >>>> +#include <linux/acpi.h>
> >>>> +#include <linux/iommu.h>
> >>>>
> >>>>  #include "fsl-mc-private.h"
> >>>>
> >>>> @@ -38,6 +40,7 @@ struct fsl_mc {
> >>>>     struct fsl_mc_device *root_mc_bus_dev;
> >>>>     u8 num_translation_ranges;
> >>>>     struct fsl_mc_addr_translation_range *translation_ranges;
> >>>> +   void *fsl_mc_regs;
> >>>>  };
> >>>>
> >>>>  /**
> >>>> @@ -56,6 +59,10 @@ struct fsl_mc_addr_translation_range {
> >>>>     phys_addr_t start_phys_addr;
> >>>>  };
> >>>>
> >>>> +#define FSL_MC_FAPR        0x28
> >>>> +#define MC_FAPR_PL BIT(18)
> >>>> +#define MC_FAPR_BMT        BIT(17)
> >>>> +
> >>>>  /**
> >>>>   * fsl_mc_bus_match - device to driver matching callback
> >>>>   * @dev: the fsl-mc device to match against @@ -124,7 +131,10 @@
> >>>> static int fsl_mc_dma_configure(struct device *dev)
> >>>>     while (dev_is_fsl_mc(dma_dev))
> >>>>             dma_dev = dma_dev->parent;
> >>>>
> >>>> -   return of_dma_configure_id(dev, dma_dev->of_node, 0, &input_id);
> >>>> +   if (dev_of_node(dma_dev))
> >>>> +           return of_dma_configure_id(dev, dma_dev->of_node, 0,
> >>>> + &input_id);
> >>>> +
> >>>> +   return acpi_dma_configure_id(dev, DEV_DMA_COHERENT, &input_id);
> >>>>  }
> >>>>
> >>>>  static ssize_t modalias_show(struct device *dev, struct
> >>>> device_attribute *attr, @@ -865,8 +875,11 @@ static int
> >> fsl_mc_bus_probe(struct platform_device *pdev)
> >>>>     struct fsl_mc_io *mc_io = NULL;
> >>>>     int container_id;
> >>>>     phys_addr_t mc_portal_phys_addr;
> >>>> -   u32 mc_portal_size;
> >>>> -   struct resource res;
> >>>> +   u32 mc_portal_size, mc_stream_id;
> >>>> +   struct resource *plat_res;
> >>>> +
> >>>> +   if (!iommu_present(&fsl_mc_bus_type))
> >>>> +           return -EPROBE_DEFER;
> >>>>
> >>>>     mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
> >>>>     if (!mc)
> >>>> @@ -874,19 +887,33 @@ static int fsl_mc_bus_probe(struct
> >>>> platform_device *pdev)
> >>>>
> >>>>     platform_set_drvdata(pdev, mc);
> >>>>
> >>>> +   plat_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> >>>> +   mc->fsl_mc_regs = devm_ioremap_resource(&pdev->dev, plat_res);
> >>>> +   if (IS_ERR(mc->fsl_mc_regs))
> >>>> +           return PTR_ERR(mc->fsl_mc_regs);
> >>>> +
> >>>> +   if (IS_ENABLED(CONFIG_ACPI) && !dev_of_node(&pdev->dev)) {
> >>>> +           mc_stream_id = readl(mc->fsl_mc_regs + FSL_MC_FAPR);
> >>>> +           /*
> >>>> +            * HW ORs the PL and BMT bit, places the result in bit 15 of
> >>>> +            * the StreamID and ORs in the ICID. Calculate it accordingly.
> >>>> +            */
> >>>> +           mc_stream_id = (mc_stream_id & 0xffff) |
> >>>> +                           ((mc_stream_id & (MC_FAPR_PL | MC_FAPR_BMT)) ?
> >>>> +                                   0x4000 : 0);
> >>>> +           error = acpi_dma_configure_id(&pdev->dev, DEV_DMA_COHERENT,
> >>>> +                                         &mc_stream_id);
> >>>> +           if (error)
> >>>> +                   dev_warn(&pdev->dev, "failed to configure dma: %d.\n",
> >>>> +                            error);
> >>>> +   }
> >>>> +
> >>>>     /*
> >>>>      * Get physical address of MC portal for the root DPRC:
> >>>>      */
> >>>> -   error = of_address_to_resource(pdev->dev.of_node, 0, &res);
> >>>> -   if (error < 0) {
> >>>> -           dev_err(&pdev->dev,
> >>>> -                   "of_address_to_resource() failed for %pOF\n",
> >>>> -                   pdev->dev.of_node);
> >>>> -           return error;
> >>>> -   }
> >>>> -
> >>>> -   mc_portal_phys_addr = res.start;
> >>>> -   mc_portal_size = resource_size(&res);
> >>>> +   plat_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >>>> +   mc_portal_phys_addr = plat_res->start;
> >>>> +   mc_portal_size = resource_size(plat_res);
> >>>>     error = fsl_create_mc_io(&pdev->dev, mc_portal_phys_addr,
> >>>>                              mc_portal_size, NULL,
> >>>>                              FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
> >>>> &mc_io); @@ -903,11 +930,13 @@ static int fsl_mc_bus_probe(struct
> >> platform_device *pdev)
> >>>>     dev_info(&pdev->dev, "MC firmware version: %u.%u.%u\n",
> >>>>              mc_version.major, mc_version.minor,
> >>>> mc_version.revision);
> >>>>
> >>>> -   error = get_mc_addr_translation_ranges(&pdev->dev,
> >>>> -                                          &mc->translation_ranges,
> >>>> -                                          &mc->num_translation_ranges);
> >>>> -   if (error < 0)
> >>>> -           goto error_cleanup_mc_io;
> >>>> +   if (dev_of_node(&pdev->dev)) {
> >>>> +           error = get_mc_addr_translation_ranges(&pdev->dev,
> >>>> +                                           &mc->translation_ranges,
> >>>> +                                           &mc->num_translation_ranges);
> >>>> +           if (error < 0)
> >>>> +                   goto error_cleanup_mc_io;
> >>>> +   }
> >>>>
> >>>>     error = dprc_get_container_id(mc_io, 0, &container_id);
> >>>>     if (error < 0) {
> >>>> @@ -934,6 +963,7 @@ static int fsl_mc_bus_probe(struct
> >>>> platform_device
> >> *pdev)
> >>>>             goto error_cleanup_mc_io;
> >>>>
> >>>>     mc->root_mc_bus_dev = mc_bus_dev;
> >>>> +   mc_bus_dev->dev.fwnode = pdev->dev.fwnode;
> >>>
> >>> Makarand, this looks a bit weird. Is there really a reason for it?
> >>
> >> Can you clarify please so that we can reach a conclusion on this matter ?
> >>
> > Laurentiu, can you clarify what exactly is the doubt here? Are you asking about
> fwnode assignment from pdev to mc_bus_dev?
> >
> 
> Yes. I remember that a while ago I tested without this fwnode assignment and
> didn't encounter any issues. Maybe we can just drop it?

Did you tested with PHY changes? Because this is needed for MAC driver, where it needs the mc bus node.

> 
> ---
> Best Regards, Laurentiu


More information about the linux-arm-kernel mailing list