[PATCH v2] ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX

[Fabio Estevam]

On Wed, Jul 8, 2020 at 8:25 PM Chris Healy <cphealy at gmail.com> wrote:
>
> The SFF soldered onto the board expects the port to use 1000BaseX.  It
> makes no sense to have the port set to SGMII, since it doesn't even
> support that mode.
>
> Signed-off-by: Chris Healy <cphealy at gmail.com>

Reviewed-by: Fabio Estevam <festevam at gmail.com>