[PATCH] drm/stm: ltdc: remove call of pm-runtime functions

Benjamin Gaignard benjamin.gaignard at linaro.org
Wed Jul 8 05:49:59 EDT 2020


Le jeu. 2 juil. 2020 à 14:18, Philippe CORNU <philippe.cornu at st.com> a écrit :
>
>
>
> On 7/1/20 2:04 PM, Yannick Fertre wrote:
> > It is not necessary to suspend or stop the ltdc clocks
> > to modify the pixel clock.
> >
> > Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
> > ---
> >   drivers/gpu/drm/stm/ltdc.c | 16 ----------------
> >   1 file changed, 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> > index 3f590d916e91..6e28f707092f 100644
> > --- a/drivers/gpu/drm/stm/ltdc.c
> > +++ b/drivers/gpu/drm/stm/ltdc.c
> > @@ -506,15 +506,7 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
> >                                struct drm_display_mode *adjusted_mode)
> >   {
> >       struct ltdc_device *ldev = crtc_to_ltdc(crtc);
> > -     struct drm_device *ddev = crtc->dev;
> >       int rate = mode->clock * 1000;
> > -     bool runtime_active;
> > -     int ret;
> > -
> > -     runtime_active = pm_runtime_active(ddev->dev);
> > -
> > -     if (runtime_active)
> > -             pm_runtime_put_sync(ddev->dev);
> >
> >       if (clk_set_rate(ldev->pixel_clk, rate) < 0) {
> >               DRM_ERROR("Cannot set rate (%dHz) for pixel clk\n", rate);
> > @@ -523,14 +515,6 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
> >
> >       adjusted_mode->clock = clk_get_rate(ldev->pixel_clk) / 1000;
> >
> > -     if (runtime_active) {
> > -             ret = pm_runtime_get_sync(ddev->dev);
> > -             if (ret) {
> > -                     DRM_ERROR("Failed to fixup mode, cannot get sync\n");
> > -                     return false;
> > -             }
> > -     }
> > -
> >       DRM_DEBUG_DRIVER("requested clock %dkHz, adjusted clock %dkHz\n",
> >                        mode->clock, adjusted_mode->clock);
> >
> >
> Hi Yannick,
> Many thanks for your patch,
> Acked-by: Philippe Cornu <philippe.cornu at st.com>
> Philippe :-)

Applied on drm-misc-next.

Thanks,
Benjamin

> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel



More information about the linux-arm-kernel mailing list