[PATCH v3 1/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
Krzysztof Kozlowski
krzk at kernel.org
Fri Jul 3 14:44:49 EDT 2020
Remove the regulators node and define fixed regulators directly under
the root node. This makes Exynos4412 Origen board consistent with other
Exynos boards.
Suggested-by: Marek Szyprowski <m.szyprowski at samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos4412-origen.dts | 21 +++++++--------------
1 file changed, 7 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index dc865be40751..8b11ad391252 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -33,20 +33,13 @@
reg = <0x0203F000 0x1000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mmc_reg: regulator at 0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ mmc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
display-timings {
--
2.17.1
More information about the linux-arm-kernel
mailing list