[PATCH v8 2/2] arm64: dts: sun50i-a64-pinephone: Add touchscreen support

[Ondřej Jirman]

On Fri, Jul 03, 2020 at 02:17:06PM +0200, Maxime Ripard wrote:
> Hi,
> 
> On Thu, Jul 02, 2020 at 10:14:32AM +0200, Ondrej Jirman wrote:
> > Pinephone has a Goodix GT917S capacitive touchscreen controller on
> > I2C0 bus. Add support for it.
> > 
> > Signed-off-by: Ondrej Jirman <megous at megous.com>
> > Acked-by: Linus Walleij <linus.walleij at linaro.org>
> > ---
> >  .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > index a89425ad3727..5c7386566053 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > @@ -121,6 +121,25 @@ &ehci1 {
> >  	status = "okay";
> >  };
> >  
> > +&i2c0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&i2c0_pins>;
> > +	status = "okay";
> 
> I didn't spot this earlier, but the pinctrl properties are already set
> in the DTSI. I've removed them while applying the patch.

Ah, right. Thank you very much. :)

regards,
	o.

> Thanks!
> Maxime