mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
André Przywara
andre.przywara at arm.com
Fri Jul 3 06:49:40 EDT 2020
On 03/07/2020 06:38, kernelci.org bot wrote:
Hi Guillaume,
is this report legit? The situation didn't change from Monday, I just
repeated the test with mainline compared to my patch reverted.
What is the actual failure here? You pointed to:
<2>GIC CPU mask not found - kernel will fail to boot.
but I don't see any explicit line stating that as the culprit anywhere
in the logs. Actually the last line says:
00:24:07.022224 Job finished correctly
And I see the GIC messages with and without this patch. As mentioned on
Monday, "-smp 2" should be added to the QEMU command line to fix that.
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * This automated bisection report was sent to you on the basis *
> * that you may be involved with the breaking commit it has *
> * found. No manual investigation has been done to verify it, *
> * and the root cause of the problem may be somewhere else. *
> * *
> * If you do send a fix, please include this trailer: *
> * Reported-by: "kernelci.org bot" <bot at kernelci.org> *
> * *
> * Hope this helps! *
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
> mainline/master bisection: baseline.dmesg.crit on qemu_arm-vexpress-a15
>
> Summary:
> Start: 7cc2a8ea1048 Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block
> Plain log: https://storage.kernelci.org/mainline/master/v5.8-rc3-37-g7cc2a8ea1048/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.txt
> HTML log: https://storage.kernelci.org/mainline/master/v5.8-rc3-37-g7cc2a8ea1048/arm/vexpress_defconfig/gcc-8/lab-cip/baseline-vexpress-v2p-ca15-tc1.html
> Result: 38ac46002d1d arm: dts: vexpress: Move mcc node back into motherboard node
>
> Checks:
> revert: PASS
> verify: PASS
What does that mean? That reverting the patch made the test pass?
I did exactly that, and reverting made it worse, because poweroff
doesn't work (among other things).
So could this be a testing artifact? Because of the failing poweroff the
test timed out or something?
Many thanks,
Andre
>
> Parameters:
> Tree: mainline
> URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> Branch: master
> Target: qemu_arm-vexpress-a15
> CPU arch: arm
> Lab: lab-cip
> Compiler: gcc-8
> Config: vexpress_defconfig
> Test case: baseline.dmesg.crit
>
> Breaking commit found:
>
> -------------------------------------------------------------------------------
> commit 38ac46002d1df5707566a73486452851341028d2
> Author: Andre Przywara <andre.przywara at arm.com>
> Date: Wed Jun 3 17:22:37 2020 +0100
>
> arm: dts: vexpress: Move mcc node back into motherboard node
>
> Commit d9258898ad49 ("arm64: dts: arm: vexpress: Move fixed devices
> out of bus node") moved the "mcc" DT node into the root node, because
> it does not have any children using "reg" properties, so does violate
> some dtc checks about "simple-bus" nodes.
>
> However this broke the vexpress config-bus code, which walks up the
> device tree to find the first node with an "arm,vexpress,site" property.
> This gave the wrong result (matching the root node instead of the
> motherboard node), so broke the clocks and some other devices for
> VExpress boards.
>
> Move the whole node back into its original position. This re-introduces
> the dtc warning, but is conceptually the right thing to do. The dtc
> warning seems to be overzealous here, there are discussions on fixing or
> relaxing this check instead.
>
> Link: https://lore.kernel.org/r/20200603162237.16319-1-andre.przywara@arm.com
> Fixes: d9258898ad49 ("arm64: dts: vexpress: Move fixed devices out of bus node")
> Reported-and-tested-by: Guenter Roeck <linux at roeck-us.net>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
>
> diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> index e6308fb76183..a88ee5294d35 100644
> --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> @@ -100,79 +100,6 @@
> };
> };
>
> - mcc {
> - compatible = "arm,vexpress,config-bus";
> - arm,vexpress,config-bridge = <&v2m_sysreg>;
> -
> - oscclk0 {
> - /* MCC static memory clock */
> - compatible = "arm,vexpress-osc";
> - arm,vexpress-sysreg,func = <1 0>;
> - freq-range = <25000000 60000000>;
> - #clock-cells = <0>;
> - clock-output-names = "v2m:oscclk0";
> - };
> -
> - v2m_oscclk1: oscclk1 {
> - /* CLCD clock */
> - compatible = "arm,vexpress-osc";
> - arm,vexpress-sysreg,func = <1 1>;
> - freq-range = <23750000 65000000>;
> - #clock-cells = <0>;
> - clock-output-names = "v2m:oscclk1";
> - };
> -
> - v2m_oscclk2: oscclk2 {
> - /* IO FPGA peripheral clock */
> - compatible = "arm,vexpress-osc";
> - arm,vexpress-sysreg,func = <1 2>;
> - freq-range = <24000000 24000000>;
> - #clock-cells = <0>;
> - clock-output-names = "v2m:oscclk2";
> - };
> -
> - volt-vio {
> - /* Logic level voltage */
> - compatible = "arm,vexpress-volt";
> - arm,vexpress-sysreg,func = <2 0>;
> - regulator-name = "VIO";
> - regulator-always-on;
> - label = "VIO";
> - };
> -
> - temp-mcc {
> - /* MCC internal operating temperature */
> - compatible = "arm,vexpress-temp";
> - arm,vexpress-sysreg,func = <4 0>;
> - label = "MCC";
> - };
> -
> - reset {
> - compatible = "arm,vexpress-reset";
> - arm,vexpress-sysreg,func = <5 0>;
> - };
> -
> - muxfpga {
> - compatible = "arm,vexpress-muxfpga";
> - arm,vexpress-sysreg,func = <7 0>;
> - };
> -
> - shutdown {
> - compatible = "arm,vexpress-shutdown";
> - arm,vexpress-sysreg,func = <8 0>;
> - };
> -
> - reboot {
> - compatible = "arm,vexpress-reboot";
> - arm,vexpress-sysreg,func = <9 0>;
> - };
> -
> - dvimode {
> - compatible = "arm,vexpress-dvimode";
> - arm,vexpress-sysreg,func = <11 0>;
> - };
> - };
> -
> bus at 8000000 {
> motherboard-bus {
> model = "V2M-P1";
> @@ -435,6 +362,79 @@
> };
> };
> };
> +
> + mcc {
> + compatible = "arm,vexpress,config-bus";
> + arm,vexpress,config-bridge = <&v2m_sysreg>;
> +
> + oscclk0 {
> + /* MCC static memory clock */
> + compatible = "arm,vexpress-osc";
> + arm,vexpress-sysreg,func = <1 0>;
> + freq-range = <25000000 60000000>;
> + #clock-cells = <0>;
> + clock-output-names = "v2m:oscclk0";
> + };
> +
> + v2m_oscclk1: oscclk1 {
> + /* CLCD clock */
> + compatible = "arm,vexpress-osc";
> + arm,vexpress-sysreg,func = <1 1>;
> + freq-range = <23750000 65000000>;
> + #clock-cells = <0>;
> + clock-output-names = "v2m:oscclk1";
> + };
> +
> + v2m_oscclk2: oscclk2 {
> + /* IO FPGA peripheral clock */
> + compatible = "arm,vexpress-osc";
> + arm,vexpress-sysreg,func = <1 2>;
> + freq-range = <24000000 24000000>;
> + #clock-cells = <0>;
> + clock-output-names = "v2m:oscclk2";
> + };
> +
> + volt-vio {
> + /* Logic level voltage */
> + compatible = "arm,vexpress-volt";
> + arm,vexpress-sysreg,func = <2 0>;
> + regulator-name = "VIO";
> + regulator-always-on;
> + label = "VIO";
> + };
> +
> + temp-mcc {
> + /* MCC internal operating temperature */
> + compatible = "arm,vexpress-temp";
> + arm,vexpress-sysreg,func = <4 0>;
> + label = "MCC";
> + };
> +
> + reset {
> + compatible = "arm,vexpress-reset";
> + arm,vexpress-sysreg,func = <5 0>;
> + };
> +
> + muxfpga {
> + compatible = "arm,vexpress-muxfpga";
> + arm,vexpress-sysreg,func = <7 0>;
> + };
> +
> + shutdown {
> + compatible = "arm,vexpress-shutdown";
> + arm,vexpress-sysreg,func = <8 0>;
> + };
> +
> + reboot {
> + compatible = "arm,vexpress-reboot";
> + arm,vexpress-sysreg,func = <9 0>;
> + };
> +
> + dvimode {
> + compatible = "arm,vexpress-dvimode";
> + arm,vexpress-sysreg,func = <11 0>;
> + };
> + };
> };
> };
> };
> -------------------------------------------------------------------------------
>
>
> Git bisection log:
>
> -------------------------------------------------------------------------------
> git bisect start
> # good: [719fdd32921fb7e3208db8832d32ae1c2d68900f] afs: Fix storage of cell names
> git bisect good 719fdd32921fb7e3208db8832d32ae1c2d68900f
> # bad: [7cc2a8ea104820dd9e702202621e8fd4d9f6c8cf] Merge tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block
> git bisect bad 7cc2a8ea104820dd9e702202621e8fd4d9f6c8cf
> # bad: [e44b59cd758acdd413512d4597a1fabdadfe3abf] Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
> git bisect bad e44b59cd758acdd413512d4597a1fabdadfe3abf
> # good: [91a9a90d040e8b9ff63d48ea71468e0f4db764ff] Merge tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
> git bisect good 91a9a90d040e8b9ff63d48ea71468e0f4db764ff
> # bad: [42d3f7e8da1bc55e3109f612c519c945f6587194] Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
> git bisect bad 42d3f7e8da1bc55e3109f612c519c945f6587194
> # bad: [6d89c73ca5813768a2cc66f7420ac0cbddf4f37d] Merge tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
> git bisect bad 6d89c73ca5813768a2cc66f7420ac0cbddf4f37d
> # bad: [0f77ce26ebcf6ea384421d2dd47b924b83649692] Revert "ARM: sti: Implement dummy L2 cache's write_sec"
> git bisect bad 0f77ce26ebcf6ea384421d2dd47b924b83649692
> # bad: [d68ec1644dd546851d651787a638aead32a60a6f] Merge tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
> git bisect bad d68ec1644dd546851d651787a638aead32a60a6f
> # bad: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
> git bisect bad 38ac46002d1df5707566a73486452851341028d2
> # first bad commit: [38ac46002d1df5707566a73486452851341028d2] arm: dts: vexpress: Move mcc node back into motherboard node
> -------------------------------------------------------------------------------
>
More information about the linux-arm-kernel
mailing list