[PATCH 1/4] dt-bindings: media: csi2dc: add bindings for microchip csi2dc

[Rob Herring]

On Thu, 02 Jul 2020 16:23:56 +0300, Eugen Hristev wrote:
> Add bindings documentation for microchip CSI2 Demultiplexer controller.
> 
> CSI2DC is a demultiplexer from Synopsys IDI interface specification to
> parallel interface connection or direct memory access.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
> ---
>  .../bindings/media/microchip,csi2dc.yaml      | 186 ++++++++++++++++++
>  1 file changed, 186 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/microchip,csi2dc.example.dt.yaml: csi2dc at e1404000: clock-names:1: 'scck' was expected
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/microchip,csi2dc.example.dt.yaml: csi2dc at e1404000: port at 0:endpoint: 'reg' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/microchip,csi2dc.example.dt.yaml: csi2dc at e1404000: 'ports' is a required property


See https://patchwork.ozlabs.org/patch/1321426

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.