[PATCH] drm/bridge/synopsys: dsi: add support for non-continuous HS clock
Yannick Fertre
yannick.fertre at st.com
Wed Jul 1 15:42:34 EDT 2020
From: Antonio Borneo <antonio.borneo at st.com>
Current code enables the HS clock when video mode is started or to
send out a HS command, and disables the HS clock to send out a LP
command. This is not what DSI spec specify.
Enable HS clock either in command and in video mode.
Set automatic HS clock management for panels and devices that
support non-continuous HS clock.
Signed-off-by: Antonio Borneo <antonio.borneo at st.com>
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index d580b2aa4ce9..979acaa90d00 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -365,7 +365,6 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
if (lpm)
val |= CMD_MODE_ALL_LP;
- dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
dsi_write(dsi, DSI_CMD_MODE_CFG, val);
}
@@ -541,16 +540,22 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
unsigned long mode_flags)
{
+ u32 val;
+
dsi_write(dsi, DSI_PWR_UP, RESET);
if (mode_flags & MIPI_DSI_MODE_VIDEO) {
dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
dw_mipi_dsi_video_mode_config(dsi);
- dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
} else {
dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
}
+ val = PHY_TXREQUESTCLKHS;
+ if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+ val |= AUTO_CLKLANE_CTRL;
+ dsi_write(dsi, DSI_LPCLK_CTRL, val);
+
dsi_write(dsi, DSI_PWR_UP, POWERUP);
}
--
2.17.1
More information about the linux-arm-kernel
mailing list