[PATCH] phy: zynqmp: Fix unused-function compiler warning
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Wed Jul 1 10:01:08 EDT 2020
On Wed, Jul 01, 2020 at 04:00:26PM +0200, Tobias Klauser wrote:
> On 2020-07-01 at 15:44:43 +0200, Laurent Pinchart <laurent.pinchart at ideasonboard.com> wrote:
> > On Wed, Jul 01, 2020 at 07:06:43PM +0530, Vinod Koul wrote:
> > > On 01-07-20, 16:19, Laurent Pinchart wrote:
> > > > On Wed, Jul 01, 2020 at 11:04:38AM +0200, Tobias Klauser wrote:
> > > > > This fixes the following compiler warning when building with
> > > > > CONFIG_PM && !CONFIG_PM_SLEEP:
> > > > >
> > > > > drivers/phy/xilinx/phy-zynqmp.c:830:12: warning: ‘xpsgtr_resume’ defined but not used [-Wunused-function]
> > > > > 830 | static int xpsgtr_resume(struct device *dev)
> > > > > | ^~~~~~~~~~~~~
> > > > > drivers/phy/xilinx/phy-zynqmp.c:819:12: warning: ‘xpsgtr_suspend’ defined but not used [-Wunused-function]
> > > > > 819 | static int xpsgtr_suspend(struct device *dev)
> > > > > | ^~~~~~~~~~~~~~
> > > >
> > > > Oops :-S Sorry about that.
> > > >
> > > > Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>
> Thanks for the review Laurent.
>
> > > > Vinod or Kishon, can you pick this patch up, or do I need to send a pull
> > > > request ? (It's my first driver in the PHY subsystem so I don't know
> > > > what the usual practices are there)
> > >
> > > patches are welcome :-)
> > >
> > > >
> > > > > Signed-off-by: Tobias Klauser <tklauser at distanz.ch>
> > > > > ---
> > > > > drivers/phy/xilinx/phy-zynqmp.c | 4 ++--
> > > > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
> > > > > index 8babee2ce9ec..22a0ae635797 100644
> > > > > --- a/drivers/phy/xilinx/phy-zynqmp.c
> > > > > +++ b/drivers/phy/xilinx/phy-zynqmp.c
> > > > > @@ -815,7 +815,7 @@ static struct phy *xpsgtr_xlate(struct device *dev,
> > > > > * Power Management
> > > > > */
> > > > >
> > > > > -#ifdef CONFIG_PM
> > > > > +#ifdef CONFIG_PM_SLEEP
> > >
> > > How about marking it as __maybe_unused instead?
> >
> > I don't mind either, I'll let Tobias decide, but his patch seems fine,
> > is there a drawback in his approach ? If it's just a matter of personal
> > preference, I'd rather not require a v2.
>
> I don't mind either, it was just what seemed the more straight-forward
> fix. On the other hand, it seems that marking these functions as
> __maybe_unused is the more widely used method in other PHY drivers. In
> addition it would have the nice side-effect of the code always being
> compile-checked regardless of the value of CONFIG_PM_SLEEP.
That's a good point, haven't thought about it.
> Will send a v2 using __maybe_unused and will let you decide which one to
> pick :)
You can keep my R-b :-)
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list