[PATCH] ARM: s3c24xx/rx1950: switch to atomic pwm API

Uwe Kleine-König uwe at kleine-koenig.org
Mon Jan 20 11:33:28 PST 2020


Stop using the legacy PWM API which only still exists because there are
some users left.

Note this change make use of the fact that the value of struct
pwm_state::duty_cycle doesn't matter for a disabled PWM and so its value
can stay constant simplifying the code a bit.

A side effect of the conversion is that the pwm isn't stopped in
rx1950_backlight_init() by the call to pwm_apply_args() just before
reenabling it when rx1950_lcd_power(1) is called.

Signed-off-by: Uwe Kleine-König <uwe at kleine-koenig.org>
---
 arch/arm/mach-s3c24xx/mach-rx1950.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 29f9b345a531..03d8f27cdc32 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -377,6 +377,7 @@ static struct pwm_lookup rx1950_pwm_lookup[] = {
 };
 
 static struct pwm_device *lcd_pwm;
+static struct pwm_state lcd_pwm_state;
 
 static void rx1950_lcd_power(int enable)
 {
@@ -429,15 +430,16 @@ static void rx1950_lcd_power(int enable)
 
 		/* GPB1->OUTPUT, GPB1->0 */
 		gpio_direction_output(S3C2410_GPB(1), 0);
-		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
-		pwm_disable(lcd_pwm);
+
+		lcd_pwm_state.enabled = false;
+		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
 
 		/* GPC0->0, GPC10->0 */
 		gpio_direction_output(S3C2410_GPC(0), 0);
 		gpio_direction_output(S3C2410_GPC(10), 0);
 	} else {
-		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
-		pwm_enable(lcd_pwm);
+		lcd_pwm_state.enabled = true;
+		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
 
 		gpio_direction_output(S3C2410_GPC(0), 1);
 		gpio_direction_output(S3C2410_GPC(5), 1);
@@ -493,10 +495,13 @@ static int rx1950_backlight_init(struct device *dev)
 	}
 
 	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to
-	 * the atomic PWM API.
+	 * This is only required to initialize .polarity; all other values are
+	 * fixed in this driver.
 	 */
-	pwm_apply_args(lcd_pwm);
+	pwm_init_state(lcd_pwm, &lcd_pwm_state);
+
+	lcd_pwm_state.period = LCD_PWM_PERIOD;
+	lcd_pwm_state.duty_cycle = LCD_PWM_DUTY;
 
 	rx1950_lcd_power(1);
 	rx1950_bl_power(1);
-- 
2.24.0




More information about the linux-arm-kernel mailing list