[PATCH 3/9] arm64: dts: allwinner: pinebook: Remove unused AXP803 regulators

Samuel Holland samuel at sholland.org
Sun Jan 19 08:30:58 PST 2020


The Pinebook does not use the CSI bus on the A64. In fact it does not
use GPIO port E for anything at all. Thus the following regulators are
not used and do not need voltages set:

 - ALDO1: Connected to VCC-PE only
 - DLDO3: Not connected
 - ELDO3: Not connected

Signed-off-by: Samuel Holland <samuel at sholland.org>
---
 .../boot/dts/allwinner/sun50i-a64-pinebook.dts   | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index ff32ca1a495e..8e7ce6ad28dd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -202,9 +202,7 @@
 };
 
 &reg_aldo1 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-name = "vcc-csi";
+	regulator-name = "vcc-pe";
 };
 
 &reg_aldo2 {
@@ -267,12 +265,6 @@
 	regulator-name = "vcc-edp";
 };
 
-&reg_dldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avdd-csi";
-};
-
 &reg_dldo4 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -286,12 +278,6 @@
 	regulator-name = "cpvdd";
 };
 
-&reg_eldo3 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-name = "vdd-1v8-csi";
-};
-
 &reg_fldo1 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
-- 
2.23.0




More information about the linux-arm-kernel mailing list