[PATCH AUTOSEL 4.19 396/671] clk: sunxi-ng: sun50i-h6-r: Fix incorrect W1 clock gate register

Sasha Levin sashal at kernel.org
Thu Jan 16 09:00:34 PST 2020


From: Ondrej Jirman <megous at megous.com>

[ Upstream commit f167675486c37b88620d344fbb12d06e34f11d47 ]

The current code defines W1 clock gate to be at 0x1cc, overlaying it
with the IR gate.

Clock gate for r-apb1-w1 is at 0x1ec. This fixes issues with IR receiver
causing interrupt floods on H6 (because interrupt flags can't be cleared,
due to IR module's bus being disabled).

Fixes: b7c7b05065aa77ae ("clk: sunxi-ng: add support for H6 PRCM CCU")
Signed-off-by: Ondrej Jirman <megous at megous.com>
Acked-by: Clément Péron <peron.clem at gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard at bootlin.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
index 27554eaf6929..8d05d4f1f8a1 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
@@ -104,7 +104,7 @@ static SUNXI_CCU_GATE(r_apb2_i2c_clk,	"r-apb2-i2c",	"r-apb2",
 static SUNXI_CCU_GATE(r_apb1_ir_clk,	"r-apb1-ir",	"r-apb1",
 		      0x1cc, BIT(0), 0);
 static SUNXI_CCU_GATE(r_apb1_w1_clk,	"r-apb1-w1",	"r-apb1",
-		      0x1cc, BIT(0), 0);
+		      0x1ec, BIT(0), 0);
 
 /* Information of IR(RX) mod clock is gathered from BSP source code */
 static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" };
-- 
2.20.1




More information about the linux-arm-kernel mailing list