[PATCH AUTOSEL 4.19 130/671] ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address

Sasha Levin sashal at kernel.org
Thu Jan 16 08:50:39 PST 2020


From: Chen-Yu Tsai <wens at csie.org>

[ Upstream commit d027521497592773cd23d016d36975574d3452db ]

The NAND controller device node was inserted into the wrong position,
probably due to a rebase or merge, as the file's structure does not
provide enough context for git to accurately match the previous device
node block.

Fixes: d7b843df13ea ("ARM: dts: sun8i: add NAND controller node for A23/A33")
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard at bootlin.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm/boot/dts/sun8i-a23-a33.dtsi | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index c16ffcc4db7d..a272a69519a2 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -155,6 +155,19 @@
 			#dma-cells = <1>;
 		};
 
+		nfc: nand at 1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		mmc0: mmc at 1c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -212,21 +225,6 @@
 			#size-cells = <0>;
 		};
 
-		nfc: nand at 1c03000 {
-			compatible = "allwinner,sun4i-a10-nand";
-			reg = <0x01c03000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_NAND>;
-			reset-names = "ahb";
-			pinctrl-names = "default";
-			pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
 		usb_otg: usb at 1c19000 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c19000 0x0400>;
-- 
2.20.1




More information about the linux-arm-kernel mailing list