[PATCH AUTOSEL 5.4 129/205] i2c: stm32f7: report dma error during probe

Sasha Levin sashal at kernel.org
Thu Jan 16 08:41:44 PST 2020


From: Alain Volmat <alain.volmat at st.com>

[ Upstream commit d77eceb2de99f5d7e0c645bad15511fe1af59e09 ]

Distinguish between the case where dma information is not provided
within the DT and the case of an error during the dma init.
Exit the probe with error in case of an error during dma init.

Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
Signed-off-by: Alain Volmat <alain.volmat at st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret at st.com>
Signed-off-by: Wolfram Sang <wsa at the-dreams.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/i2c/busses/i2c-stm32.c   | 16 ++++++++--------
 drivers/i2c/busses/i2c-stm32f7.c |  9 +++++++++
 2 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
index 07d5dfce68d4..1da347e6a358 100644
--- a/drivers/i2c/busses/i2c-stm32.c
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -20,13 +20,13 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 
 	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
 	if (!dma)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	/* Request and configure I2C TX dma channel */
-	dma->chan_tx = dma_request_slave_channel(dev, "tx");
-	if (!dma->chan_tx) {
+	dma->chan_tx = dma_request_chan(dev, "tx");
+	if (IS_ERR(dma->chan_tx)) {
 		dev_dbg(dev, "can't request DMA tx channel\n");
-		ret = -EINVAL;
+		ret = PTR_ERR(dma->chan_tx);
 		goto fail_al;
 	}
 
@@ -42,10 +42,10 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	}
 
 	/* Request and configure I2C RX dma channel */
-	dma->chan_rx = dma_request_slave_channel(dev, "rx");
-	if (!dma->chan_rx) {
+	dma->chan_rx = dma_request_chan(dev, "rx");
+	if (IS_ERR(dma->chan_rx)) {
 		dev_err(dev, "can't request DMA rx channel\n");
-		ret = -EINVAL;
+		ret = PTR_ERR(dma->chan_rx);
 		goto fail_tx;
 	}
 
@@ -75,7 +75,7 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	devm_kfree(dev, dma);
 	dev_info(dev, "can't use DMA\n");
 
-	return NULL;
+	return ERR_PTR(ret);
 }
 
 void stm32_i2c_dma_free(struct stm32_i2c_dma *dma)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 84cfed17ff4f..37a76516e203 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1955,6 +1955,15 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr,
 					     STM32F7_I2C_TXDR,
 					     STM32F7_I2C_RXDR);
+	if (PTR_ERR(i2c_dev->dma) == -ENODEV)
+		i2c_dev->dma = NULL;
+	else if (IS_ERR(i2c_dev->dma)) {
+		ret = PTR_ERR(i2c_dev->dma);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to request dma error %i\n", ret);
+		goto clk_free;
+	}
 
 	platform_set_drvdata(pdev, i2c_dev);
 
-- 
2.20.1




More information about the linux-arm-kernel mailing list