[PATCH 8/9] watchdog: of_xilinx_wdt: Wire setting up timeout via module parameter/DT

Srinivas Neeli srinivas.neeli at xilinx.com
Thu Jan 16 05:26:56 PST 2020


From: Srinivas Goud <srinivas.goud at xilinx.com>

Add support for setting up timeout via kernel module parameter or read
timeout-sec via device tree.

Signed-off-by: Srinivas Goud <srinivas.goud at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
 drivers/watchdog/of_xilinx_wdt.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/watchdog/of_xilinx_wdt.c b/drivers/watchdog/of_xilinx_wdt.c
index d2c389d9eaa7..375289e3bed2 100644
--- a/drivers/watchdog/of_xilinx_wdt.c
+++ b/drivers/watchdog/of_xilinx_wdt.c
@@ -18,6 +18,7 @@
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 
+#define XWT_WWDT_DEFAULT_TIMEOUT	10
 #define XWT_WWDT_MIN_TIMEOUT		1
 #define XWT_WWDT_MAX_TIMEOUT		80
 
@@ -55,6 +56,13 @@
 
 #define WATCHDOG_NAME     "Xilinx Watchdog"
 
+static int wdt_timeout;
+
+module_param(wdt_timeout, int, 0644);
+MODULE_PARM_DESC(wdt_timeout,
+		 "Watchdog time in seconds. (default="
+		 __MODULE_STRING(XWT_WWDT_DEFAULT_TIMEOUT) ")");
+
 /**
  * enum xwdt_ip_type - WDT IP type.
  *
@@ -416,6 +424,15 @@ static int xwdt_probe(struct platform_device *pdev)
 			xilinx_wdt_wdd->timeout =
 				2 * ((1 << xdev->wdt_interval) /
 					pfreq);
+	} else {
+		xilinx_wdt_wdd->timeout = XWT_WWDT_DEFAULT_TIMEOUT;
+		xilinx_wdt_wdd->min_timeout = XWT_WWDT_MIN_TIMEOUT;
+		xilinx_wdt_wdd->max_timeout = XWT_WWDT_MAX_TIMEOUT;
+
+		rc = watchdog_init_timeout(xilinx_wdt_wdd,
+					   wdt_timeout, &pdev->dev);
+		if (rc)
+			dev_warn(&pdev->dev, "unable to set timeout value\n");
 	}
 
 	spin_lock_init(&xdev->spinlock);
-- 
2.7.4




More information about the linux-arm-kernel mailing list