[PATCH v5 0/6] Raspberry Pi 4 PCIe support

Lorenzo Pieralisi lorenzo.pieralisi at arm.com
Wed Jan 15 04:02:38 PST 2020


On Mon, Dec 16, 2019 at 12:01:06PM +0100, Nicolas Saenz Julienne wrote:
> This series aims at providing support for Raspberry Pi 4's PCIe
> controller, which is also shared with the Broadcom STB family of
> devices.
> 
> There was a previous attempt to upstream this some years ago[1] but was
> blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
> is something currently not supported by the kernel.  Luckily this is not
> the case for the Raspberry Pi 4.
> 
> Note the series is based on top of linux next, as the DTS patch depends
> on it.
> 
> [1] https://patchwork.kernel.org/cover/10605933/
> [2] https://patchwork.kernel.org/patch/10605957/
> 
> ---
> 
> Changes since v4:
>   - Rebase DTS patch
>   - Respin log2.h code into it's own series as it's still contentious
>     yet mostly unrelated to the PCIe part
> 
> Changes since v3:
>   - Moved all the log2.h related changes at the end of the series, as I
>     presume they will be contentious and I don't want the PCIe patches
>     to depend on them. Ultimately I think I'll respin them on their own
>     series but wanted to keep them in for this submission just for the
>     sake of continuity.
>   - Addressed small nits here and there.
> 
> Changes since v2:
>   - Redo register access in driver avoiding indirection while keeping
>     the naming intact
>   - Add patch editing ARM64's config
>   - Last MSI cleanups, notably removing MSIX flag
>   - Got rid of all _RB writes
>   - Got rid of all of_data
>   - Overall churn removal
>   - Address the rest of Andrew's comments
> 
> Changes since v1:
>   - add generic rounddown/roundup_pow_two64() patch
>   - Add MAINTAINERS patch
>   - Fix Kconfig
>   - Cleanup probe, use up to date APIs, exit on MSI failure
>   - Get rid of linux,pci-domain and other unused constructs
>   - Use edge triggered setup for MSI
>   - Cleanup MSI implementation
>   - Fix multiple cosmetic issues
>   - Remove supend/resume code
> 
> Jim Quinlan (3):
>   dt-bindings: PCI: Add bindings for brcmstb's PCIe device
>   PCI: brcmstb: Add Broadcom STB PCIe host controller driver
>   PCI: brcmstb: Add MSI support
> 
> Nicolas Saenz Julienne (3):
>   ARM: dts: bcm2711: Enable PCIe controller
>   MAINTAINERS: Add brcmstb PCIe controller
>   arm64: defconfig: Enable Broadcom's STB PCIe controller
> 
>  .../bindings/pci/brcm,stb-pcie.yaml           |   97 ++
>  MAINTAINERS                                   |    4 +
>  arch/arm/boot/dts/bcm2711.dtsi                |   31 +-
>  arch/arm64/configs/defconfig                  |    1 +
>  drivers/pci/controller/Kconfig                |    9 +
>  drivers/pci/controller/Makefile               |    1 +
>  drivers/pci/controller/pcie-brcmstb.c         | 1007 +++++++++++++++++
>  7 files changed, 1149 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
>  create mode 100644 drivers/pci/controller/pcie-brcmstb.c

Applied patches [1,3,4] to pci/brcmstb, please have a look to check
everything is in order after the minor update I included.

Thanks !
Lorenzo



More information about the linux-arm-kernel mailing list