[PATCH] i2c: meson: implement the master_xfer_atomic callback

Wolfram Sang wsa at the-dreams.de
Mon Jan 13 14:15:32 PST 2020

On Wed, Jan 08, 2020 at 12:29:01AM +0100, Martin Blumenstingl wrote:
> Boards with some of the 32-bit SoCs (mostly Meson8 and Meson8m2) use a
> Ricoh RN5T618 PMU which acts as system power controller. The driver for
> the system power controller may need to the I2C bus just before shutting
> down or rebooting the system. At this stage the interrupts may be
> disabled already.
> Implement the master_xfer_atomic callback so the driver for the RN5T618
> PMU can communicate properly with the PMU when shutting down or
> rebooting the board. The CTRL register has a status bit which can be
> polled to determine when processing has completed. According to the
> public S805 datasheet the value 0 means "idle" and 1 means "running".
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>

Applied to for-next, thanks!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20200113/7f2f60f3/attachment.sig>

More information about the linux-arm-kernel mailing list