[PATCH V5 3/4] ARM: dts: bcm2711: Enable thermal

Stefan Wahren stefan.wahren at i2se.com
Mon Jan 13 10:56:17 PST 2020


This enables thermal for the BCM2711 (used on Raspberry Pi 4) by adding
the AVS monitor and a subnode for the thermal part.

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
---
 arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 961bed8..96f341d 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -66,6 +66,17 @@
 						 IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		avs_monitor: avs-monitor at 7d5d2000 {
+			compatible = "brcm,bcm2711-avs-monitor",
+				     "syscon", "simple-mfd";
+			reg = <0x7d5d2000 0xf00>;
+
+			thermal: thermal {
+				compatible = "brcm,bcm2711-thermal";
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
 		dma: dma at 7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xb00>;
@@ -363,6 +374,7 @@
 
 &cpu_thermal {
 	coefficients = <(-487) 410040>;
+	thermal-sensors = <&thermal>;
 };
 
 &dsi0 {
-- 
2.7.4




More information about the linux-arm-kernel mailing list