[PATCH V3 0/5] Add support for PCIe endpoint mode in Tegra194

Vidya Sagar vidyas at nvidia.com
Mon Jan 13 10:14:06 PST 2020


Tegra194 has three (C0, C4 & C5) dual mode PCIe controllers that can operate
either in root port mode or in end point mode but only in one mode at a time.
Platform P2972-0000 supports enabling endpoint mode for C5 controller. This
patch series adds support for PCIe endpoint mode in both the driver as well as
in DT.
This patch series depends on the changes made for Synopsys DesignWare endpoint
mode subsystem that are currently under review
@ https://patchwork.kernel.org/project/linux-pci/list/?series=202211
which in turn depends on the patch made by Kishon
@ https://patchwork.kernel.org/patch/10975123/
which is also under review.

V3:
* Re-ordered patches in the series to make the driver change as the last patch
* Took care of Thierry's review comments

V2:
* Addressed Thierry & Bjorn's review comments
* Added EP mode specific binding documentation to already existing binding documentation file
* Removed patch that enables GPIO controller nodes explicitly as they are enabled already

Vidya Sagar (5):
  soc/tegra: bpmp: Update ABI header
  dt-bindings: PCI: tegra: Add DT support for PCIe EP nodes in Tegra194
  arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194
  arm64: tegra: Add support for PCIe endpoint mode in P2972-0000
    platform
  PCI: tegra: Add support for PCIe endpoint mode in Tegra194

 .../bindings/pci/nvidia,tegra194-pcie.txt     | 125 ++-
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |  18 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |  99 +++
 drivers/pci/controller/dwc/Kconfig            |  30 +-
 drivers/pci/controller/dwc/pcie-tegra194.c    | 770 +++++++++++++++++-
 include/soc/tegra/bpmp-abi.h                  |  10 +-
 6 files changed, 1007 insertions(+), 45 deletions(-)

-- 
2.17.1




More information about the linux-arm-kernel mailing list